With the last update of its Spark audio wave editor before the company abandoned software for dedicated audio hardware development, tc|werke indicated that no higher system than OS…

Thanks for the reply, beachycove. I'm glad the problem is being tackled by people who know what they're doing. I, too, will wait until the last possible moment to install the patch…

A different solution appears to be under development. There is a reasonably active open source development community around the Newton OS, so hopefully this nut will soon be cracke…

I found myself eying a boat load of Newton accessories when I remember the 2010 problem. I've read about it but I haven't figured out if there is a definite fix for it. Is there? I…

The software for your card is here. You can format the "rest" of the disk with HFS once you've got GS/OS up and running (and updated to a non-buggy HFS driver) to recover the othe…

It's an Apple II SCSI card, of which I just the found the manual here. But according to that manual, I have to use software provided with the SCSI peripheral to format and partitio…

...the full GS/OS install is intented to be made on an external hard disk, right? Click to expand... Right. Assuming my SCSI card works (which I haven't tried), will it …

Thanks! Next question (I haven't tried yet, just wondering): the full GS/OS install is intented to be made on an external hard disk, right? Assuming my SCSI card works (which I ha…

stock IIgs didn't have a fan, right? Click to expand... Right. Can I safely remove it? Click to expand... Probably. If someone put a fan in there, it was probably be…

my tempo card shows up as a scsi device that is normal i have never ran it or anything on 10.1 sorry

I do have only a 2 Mb Ram card. I also have what I think is a SCSI card, not installed as of yet. So it should be ok, I hope. Thanks!

According to pictures of the IIgs innards I found on the net, stock IIgs didn't have a fan, right? Click to expand... Right. You can safely remove it if you don't have any unn…

Ok, it's time for some feed-back! I finally went further with cleaning those drives, since I recently got a nice Apple ][ Europlus and I needed the IIgs to be working in order to …

Status report: Made some changes to the G3's config file in regards to the modem port. In the GS, I used the monitor to do a 2 (Control-K) Return. Also tried PR#2. Both seem to ge…

Apple //c as a Dumb Terminal to my Mac mini Click to expand... I read that this morning, but had doubts about it, because the guy used a Mac mini without serial ports, whereas I …

Apple //c as a Dumb Terminal to my Mac mini

It's marvellous what this new fangled google thing will do... http://macosx.com/forums/mac-os-x-system-mac-software/2758-using-getty-serial-port-consoles.html

Some you might remember the desktop G3 I got awhile ago. Here's the setup: 1.) Desktop G3 with OS 10.2 and the usual printer/modem serial ports 2.) An Apple IIgs with the same se…

I haven't seen that file on machut or my local mirrors of quite a bunch of macintosh web/ftp sites. Does it exist?

Any sign of MacTerminal 2, eg the one that uses the Communications Toolbox?

Pretty sweet, Wacky ! I've added MacHut to the list of **Free "System 6" SoftWare** :b&w:

would u consider setting it up so we can dial in to it with telnet for the purpose of software development?

The first mirror of Mac Hut is now online: http://machut.uberhost.dyndns.org/ Use it if the official site happens to be down, or is really slow.

The service life of hard drives, like many things, is dependent on how they're used. Particular to a notebook drive, duty cycle is one item of concern. These drives are not design…

No, its working fine under 10.2 so I'd just as soon leave it alone without some actual notion that it will work under 10.1 Really I'm just looking to see if anybody else has run i…