Have you considered simply getting a game adapter and using that for wireless? I have a WGA600N velcro'ed to my TiBook/867 which is powered off the FireWire, and the WGA handles th…

The difference between the "Silver" and 'Gold" Lucent cards is the "Silver" only supported 40/64 bit WEP, while almost everything else in the universe uses 104/128 bit WEP. The ori…

Can anyone help? I am having trouble connecting on my home network with my Powerbook 1400/166 equipped with a Lucent/Orinoco Silver card. It works fine on the open network at work,…

Not sure if this is applicable in your situation, but I'm running Netatalk under Slackware 13 (upgraded from Slackware 12.1). After my upgrade, I noticed that I couldn't connect t…

I would concentrate on getting AFP going. At least that is what netatalk is good at doing.

Porter, Thanks a lot. That was interesting. I removed (well, commented) the config line in the atalkd.conf and restarted services, then power cycled the AsanteTalk. when I check…

I would clear the address and zone information from your netatalk.conf. Zones only make sense to netatalk if it is active on multiple network cards and acting as a bridge between …

If I unplug the AsanteTalk for a minute, the Mac tells me that the AppleTalk network is not available. If I then plug it in I do get the alert from the Mac that the AppleTalk netwo…

Once the machines are all up and running and you think everything should be working, unplug the power to the AsanteTalk, wait a minute, then and re apply the power to it. This sho…

.conf file stuff: from atalkd.conf: fxp0 -seed -phase 2 -net 1-1000 -addr 1000.142 -zone "weif" This seems to match what I see in /var/log/messages afpd.conf is empty (except t…

the AsanteTalk packaging says it allows your ethernet Mac "to communicate with up to eight LocalTalk devices, including LocalTalk Macintoshes and LocalTalk supported printers." I w…

Thanks for all the tips, everyone. Yes, the kernel was compiled with netatalk enabled. I don't see any errors (at least nothing I think are errors) in /var/log/messages when I st…

Unless the Asante bridge is one of those "crippled" bridges that only work with printers, I suspect it's just "dumb" bridge and will happily shunt AppleTalk packets back and forth …

I'm actually more interested in the Asante box. Do you have another known-good Mac you can put on the other side of the bridge to make sure that the Asante is routing AppleTalk cor…

You can also patch Drive Setup, which is better than HD SC Setup, IMO. It's not very hard to do.

It'd be handy to know a bit more about your Netatalk setup (maybe post relevant parts of the config files: atalkd.conf and AppleVolumes,default would be good). Did you re-compile…

Apple prevented third-party drives by not allowing people to format drives that do not already have the Apple drivers on them. (Not sure if I said that accurately, but you get the…

Okay. I've got a Power Macintosh 7500 (see signature) with a 68-pin Ultra 160 SCSI LVD/SE Adaptec controller card. The model number of the card is AHA-2940U2B. It says on a labe…

Thanks for the follow ups. FYI.... I am running 7.5.5 and the only resolution choice in "Monitors" settings is 512x384. Oh well. I was holding off on doing the 640x480 hack, fig…

You most certainly can share a CD over LocalTalk - you just can't BOOT from it. I have installed OS 8 over LocalTalk, booted off a custom boot floppy with System 7.6, and a few oth…

Will have to try it out.

Is iCab alot better? Click to expand... AFAIK, it deals with the modern Internet much better.

Is iCab alot better?

Nice job! As for me, I've gotten iCab on my own IIci; just finishing the additional work needed with an Asante card.

Aye good work!