There are also software routers and MacIP gateways, like the old "Apple Internet Router" that you can run on a second, ethernet capable Mac to do this - but you don't really want t…

The Farallon EtherWave is a "full TCP/IP" device and should act like a conventional ethernet adapter. They're a bit on the slow side, but adequate for basic use with a Plus or SE. …

The problem is that LocalTalk can't "do" tcp/ip (the "internet" protocol) - it can only handle AppleTalk and that's it. MacTCP allows you to work around this limitation by wrappin…

MacTCP settings : What Eudora says :

2. No - why should I ? Click to expand... Well I've done a bit of google and found "why" on my own... But errrrr I haven't found "how" ?!

1. Thanks 8-o I'll try that then 2. No - why should I ?

First, the basics : I run system 6.0.8, the Etherwave bridge is connected to the modem port of the Plus on one side and to my router on the other (and is 12V plugged too...). Cl…

Hi everyone, As the title says, I'm the proud owner of a Plussed 512, a Farallon Etherwave localtalk-to-ethernet bridge and of an internet connection - and my goal is obviously to…

Battery reset was probably needed to fix a software bug in the smart controller inside the battery, something nobody noticed untill so many hours of use in specific circumstances c…

That the battery charges in the VST charger is absolutely key. It can't be a bad battery. Now I am no expert, but I would probably try the following: unplug backup battery and ma…

I've tried BatteryReset and it made no difference. I'll concede that the battery is probably bad. The strange thing, though, is that it will charge to four lights and be usable in …

Remove the PRAM battery if it is dead, just causes problems. Sounds like you either messed up a cable or something if those buttons do not work, not a common problem.

1. sounds like the battery itself is faulty. Have you tried Battery Reset? 2. sound like the backup battery is long past dead. 3. no idea, but I have never heard of this problem …

I suppose it might be possible (long shot) to set up the module to act as an Appletalk bridge by writing a custom firmware for it. / port something like NetaTalk / emulate an Local…

Why did I say wheelie bin? Because that's what HE said. Turned out to be a large tub, about three quarters full. I'm kind of glad in a way, because, I wouldn't have had the space…

I suppose it might be possible (long shot) to set up the module to act as an Appletalk bridge by writing a custom firmware for it. / port something like NetaTalk / emulate an Local…

Thanks, Gorgonops, for those great ideas. Software and I parted company when the goto statement was outlawed (a legal condition of getting my graduate degree was that I not write c…

I have a 300mhz Wallstreet which mostly works well, but has a couple of issues: First, I think I have some version of the charging board problem. In my case, the system recognizes…

Thanks, Gorgonops, for those great ideas. Software and I parted company when the goto statement was outlawed (a legal condition of getting my graduate degree was that I not write c…

http://www.sparkfun.com/commerce/product_info.php?products_id=9290 And it's hardly the only one out there. Whether $70-90 is within hobbyist range is up to you. Click to expand…

The WiFly GSX module incorporates a 2.4GHz radio, processor, TCP/IP stack / preloaded with software to simplify integration and minimizes development of your application. In the si…

I would think industrial machines had RS-422 so you can hook up quite a few devices to one line (each having its own ID). Anyway can't you just send data over the serial port on a…

Is it April 1 where you are living? Click to expand... the one you just took a shot at. Click to expand... Click to expand... Disclaimer: Absolutely no shots were taken …

Is it April 1 where you are living? Click to expand... the one you just took a shot at. Click to expand... Click to expand... Disclaimer: Absolutely no shots were taken …

For the record, these things already exist. Here's an example of one. Similar devices exist for Ethernet as well. To clarify matters a little bit, these are not general purpose "n…