maybe I should make it 33mhz...

It's 25 MHz. What do you expect? :lol:

...And it's running!But. It. Is. Running. Very. Slow. And. Has. Been. Loading. The. 68kmla. Index. for. about. a. minute. and. is. not. even. close. to. done. yet. Click to expa…

...And it's running! But. It. Is. Running. Very. Slow. And. Has. Been. Loading. The. 68kmla. Index. for. about. a. minute. and. is. not. even. close. to. done. yet.

I didnt need that extension to connect to my iMac. But oops: i forgot TCP/IP... Do I want to connect via AppleTalk or Ethernet? My AppleTalk is set to EtherTalk, so i'm not sure.

Remember, you still need the Apple Ethernet LC extension too.

So...did you configure TCP/IP?

oh, and it is connected to my laptop and internet sharing, not the router. the router is ~100ft away

i HAVE a pds ethernet card. thats how i installed 7.6.

What you need is a PDS ethernet card. It allows an ethernet plug to directly plug into your computer. The processor direct slot is the white or black socket on the left side of t…

I need help getting my LC III on the internet. I setup internet sharing on my Vista laptop, and it works fine on my iMac. I put iCab on the LC III and plugged in the ethernet cab…

Going to pick this one up on the weekend. The guy said it had CD and floppy modules, ethernet cards, fax modems, SCSI adapters and lots of software. He said it was in good condit…

You may need special drivers for that Farallon card - a lot of third party ethernet cards need their own drivers under System 7, rather than the drivers that Apple provides.

Nuke the HD and reinstall everything?

help? :'(

Have you used Asanté EtherTalk Installer v5.6.1? Ideallly the software is installed before OT 1.1.1/1.1.2 so that it cannot overwrite OT with older componets. It is by no means e…

Some of those Asante devices aren't full-fledged Ethernet->Localtalk bridges, but rather, dedicated printer adapter devices. Easiest way to do what you want to do is to get…

As far as I know, vintage Asante kit doesn't work at all with modern networking equipment. You need a 10 Mbps hub (very cheap) in between your DSL modem and your Quadra 605.

I'm having trouble getting my Quadra 605 connected to the internet through my LAN and DSL modem. The DSL modem is a Motorola Netopia 3347. The DSL connection is through Qwest. I …

Good News: 128mb stick worked; Color Classic now reports 135mb of built-in memory. I have virtual memory off. Any use for RAM disk now? Bad news: Gah! Now that I have OT 1.1.1 i…

I described what I did here: http://www.macmod.com/forums/viewtopic.php?f=36&t=3522 But just look around on newegg for Sil3512 cards. It is a really straight forward proc…

Stupidly enough, OpenTransport 1.1.2 is only available as an update. This means you have to install OT 1.1.1 first, and then upgrade to 1.1.2, which is a bit of a bore. Having said…

Go with 1.1.2, the files called: - OT_1.1.2-1of4.sea.bin - OT_1.1.2-2of4.sea.bin - OT_1.1.2-3of4.sea.bin - OT_1.1.2-4of4.sea.bin

Great, I'll give OT a shot. I found this website from apple: http://download.info.apple.com//Apple_Support_Area/Apple_Software_Updates/English-North_American/Macintosh/Networking…

I second Nico's suggestion to use Open Transport - while it is a bit of a memory hog as he said, it is much, much, much, much easier to configure than MacTCP, and supports DHCP, wh…