There shouldn't be any problems doing your transfer. ------------------ -- Dave Gammage, MCSE Network Administrator Stouse, Inc.

If you are going to be passing data back and forth all the time, there are two ways we use to speed things up: First, most of our machines have Zip disk drives. That's our usual "…

Hi, I've done what you've mentioned and had no problems. I assume you want to use Appletalk, so you'll have to select "Ethernet" in the Appletalk control panel. Then you have to o…

Does anybody know what if any length limitations there are in a mac to mac ethernet connection, and where I could find various lenghts of ethernet cable w/ RJ-45 jacks at each end.…

I don't know how far they can go but, to get long lengths, you have to go to your dealer or anyone that can make cables and ask them to make it and how long it can go.

Category 5 Ethernet cable runs can be a maximum of 100 meters without any sort of repeater. Anything longer than that will require a repeater inline. Are you utilizing a hub-to-hub…

I need help as fast as I can get it. I need to figure out how to connect my new BW G3 to my trusty HP 5MP printer. Keyspan USB to serial does not work. Has someone figured it out? …

Farallon makes some LocalTalk to Ethernet connectors. Check their web site.

I sent email to sales@keyspan.com. They answered my question about an adapter for my HP 4 ML by telling me it would be available in April and probably cost $100. Suggest you try th…

My printers all now work. The Epson connects through the Keyspan USB and the HP 5MP goes through Farallon's iPrint ethernet to localtalk. All's well that ends (prints) well.

Correct me if I am wrong, but I thought the B/W G3's had an IRDA (infrared) "port". If so, one should be able to communicate to a LaserJet 5/6 MP printer using the IRDA. It may …

I have 2 IMACs that both have Apple Remote Access software on them. I need to install one of the machines at a site that has a NT Network running. Using my internet access I want…

First, to connect to an NT network, all you need is a standard base-T cable plugged into the ethernet port of your iMac. For further functionality and interoperability with the NT …

Can anyone tell me how to use my iMac as the monitor on my G3 tower. I have heard it to be done, and need to know how.

Now I have never done this and never heard of it being done but I know that if you take the bottom casing off of the iMac that the monitor cable is there. I guess you can connect …

All this talk about overclocking has me wondering what I can get out of my beige G3/266 Minitower. Anybody tried that?

I too wouldn't wind knowing how to get my Beige G3/300 MT upto 333Mhz if possible. I've seen how to get a 233 faster but never the 300.

Does anyone know how to change the duplex setting of the built-in 100BaseT ethernet from the current HALF duplex to FULL duplex without having to get another NIC from another vendo…

Ckeck your hub setings, I run a Macsence switch and I get default full duplexing. If your hub only handles half then the card will sence and switch to a half duplex. -------------…

Just reading the docs on the onboard NIC and the secret is that your hub needs to be autosensing and full duplex capable. Meet those conditions and the B&W will connect at 100B…

I have a powerbook G3 233/14.1 and am looking for a speed bump that will not hurt my processor, does anyone have any successful configurations?...

Hello All! I'm on the verge of buying a Performa 6360, because I can get a really sweet deal on it. The one thing I'm worried about is that I went to Micro Conversions' web site,…

I'm not sure of this but it may be because your 6360 only supports 5 inch PCI Cards and the Voodoo2 is a 7 inch.

I own a Performa 6360 and was going to purchase a video card however I decided to sbegin saving up my money to by a new Power Mac. When I was looking I found that only the ATI RAG…

Has anyone heard if Apple will be shipping the new G3s with 250 MB zip drives anytime soon?