OS 9 can't do "WEP passwords" very well. Is your base station a genuine AirPort base station, or is it 3rd party? If it's 3rd party, the password can't be used in OS 9. You'll h…

Thanks for the reply! The base station is a genuine last gen Airport Extreme. Does that change something? Actually I could as well go with the MAC address filter.

OS 9 can't do "WEP passwords" very well. Is your base station a genuine AirPort base station, or is it 3rd party? If it's 3rd party, the password can't be used in OS 9. You'll h…

Hi all, I have a nearly pristine Pismo with 512 Mb of Ram, happily running both Mac OS X 10.3.9 and Mac OS 9.2.2 on a 60 Gb hard drive. It has an Airport card, which I can use jus…

To rocketath--I think I detect distinct sarcasm and/or rudeness from your reply. nobody is telling me how to OPEN THE CASE Click to expand... THANKS for the link,…

There are four screws you need to remove. You can see two already. The other two are hidden underneath a panel that pops off. The panel has tons of holes in it, and underneath you …

Right, Sorry-not a G4; Green Slot load imac G3. Thanks for the replies, but aside from which one is easier to get to than the other, nobody is telling me how to OPEN THE CASE. I'm…

actually, i find it quite the opposite, save for the G4. The tray-load are easy, just take off the bottom, and then pull out the tray. The CD is just fixed to it, and easy to get.…

actually, i find it quite the opposite, save for the G4. The tray-load are easy, just take off the bottom, and then pull out the tray. The CD is just fixed to it, and easy to get…

The iMac G3 tray load and iMac G4's I must say are the two harder ones to get drives out of. The slot load on the other hand is much simpler.

Hi, Try this page. It's a great resource that provides instructions on getting to any component in a slot-loading iMac. http://www.scribd.com/doc/103447/iMac-G3-Disassembly-Guid…

How do I get the to the HD on a slot-loading imac

It is a slot-loading model

It is a slot-loading model

We need a bit more info...is it a tray loading model like this: { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbo…

I need to put a new drive in my imac G4. How do I get it open?

I believe the other one is Delphi. Click to expand... yeah that sounds about right.

There were also two different types of cooling units, one by Panasonic and one by...somebody else, i forget who, the one by Panasonic actually works brilliantly and has a much lowe…

Not even all the G4's could boot into OS9 directly, you just had classic support under OSX. Click to expand... I think the last gen MDD were the non OS 9. Click to expand...…

After getting this up and running, I am now on a roll. I just got a troublesome quicksilver up and running. It was originally not booting, or booting to openfirmware prompt and fr…

Looking at the name plate was my first place to look however it was just a 1400c label. That website worked for me and I found that the machine I have is a 1400c 133mhz while the …

Umm, doesn't the machine's badge tell you that? It should say one of the following: 1400cs/117 1400c/117 1400cs/133 1400c/133 1400cs/166 1400c/166 The 2nd number (after the…

IIRC the 166Mhz CPU only worked in 1400/166 models, so if that works in there you'd assume it was originally specced to this. JB

I got a G3 upgraded Powerbook 1400c a few days ago and it came with 2 133mhz and 1 166mhz in addition to the G3 chip inside. Is there any way to tell what the original CPU was? T…

Well not all G5s are liquid cooled, basically if its clock speed is 1.6, 1.8 or 2.0, regardless of processor count, its air-cooled and thus has no chance of spontaneous combustion.…