Apple Remote Desktop will allow you to mirror a display from one Mac to another through a FireWire cable if you're using FireWire networking. There's no way to create a spanned (n…

Apple Remote Desktop will allow you to mirror a display from one Mac to another through a FireWire cable if you're using FireWire networking. There's no way to create a spanned (n…

It's not going to happen or of something does exist it will be incredibly expensive Just pick up another PCI ATI Rage 128 or upgrade to a dual-capable Mac AGP graphics card, li…

Yeah but that only would work with iMovie, I need something that will take the signal being sent as the display 2 through the firewire port.

Only thing I an think of off the top of my head would be to use a DV video camera or some other kind of Firewire video I/O connected to a TV display. If that works.

Hey guys, is there a way I could output my second display through firewire on my Quicksilver? I'm curious because I want to use the NVIDIA GeForce2MX's video card in my AGP Graphic…

Update... Success! I have two hard drives now on the optical drive ata bus.

An update: I'm short on cash, but I was able to scrape together enough money to buy everything but the new processor and the video card. I also ended up getting a USB 2.0 card beca…

Well I just threw in a 27GB WD on there and it worked without a hitch, even without jumpers! Thanks for the reassurance guys. I tried this before and it didn't work but I found ou…

Yes. The Optical drive will be the master on that bus.

I wasn't I was going to use it as part of server storage. I assume that cable is slave right?

Can you connect a hard drive to the second ata plug on the optical drive cable? Click to expand... I used to on my graphite. Just make sure the jumpers are set correctly. The b…

Can you connect a hard drive to the second ata plug on the optical drive cable?

There were three revisions of the Beige G3 ROM: -A (LROG434-01/02), -B (LROG434-02) and -C (LROG434-03), and all with part no 820-0954. There are five subspecies of the Rev. A, but…

I'm not sure how I'm going to get xpostfacto on the new drive. Is there a way to run two ide drives at once? I think I read somewhere you can't.

I've fiddled with OS X and XPostFacto on a number of beige G3s, and my conclusion is that you should use either 10.4 Tiger or 10.2 Jaguar. There's no reason ever to use 10.3 Panthe…

Ok, I'm still trying to figure out what os to put on, but I'll probably still go with tiger if it installs. I came up short on cash this week so I haven't ordered everything, and t…

I'd see about using xpostfacto to install 10.3 on it. I found that 10.2 was a nightmare on the older G3 hardware (beige G3, Wallstreet Powerbooks). Not to mention, Panther just r…

I have been able to use iBook disks on other macs. Thats the only ones that seem to be workable. Click to expand... The retail discs are model-agnostic. However, the discs that…

I have been able to use iBook disks on other macs. Thats the only ones that seem to be workable. Click to expand... The retail discs are model-agnostic. However, the discs that…

I have been able to use iBook disks on other macs. Thats the only ones that seem to be workable.

I have the install discs for tiger that came with my iBook. Click to expand... Those are 'system-specific' installation discs. Are their labels grey? 'Original' in this conte…

I have the install discs for tiger that came with my iBook.

as far as running panther or tiger, you have to have the original system discs. It won't install without help from xpostfacto, but i can guide you along if that is the route you w…

I thought the maximum OS for it was 10.2.8, but if it'll run tiger, i'll put that on instead.