Unplug the router, modem etc... Plug the computer directly back into the modem, and then turn them both on again. Get the IP, and now go through the procedure of connecting the r…

I set my system up! I couldn't register my new cable account without running their software. ghporter, I've described the ISP software in the original post. In the last paragrap…

Thorin, I missed that in my original read. Sorry, because I think what's going on has a lot to do with what the software did. From the log it looks like it did a number of things…

Before I moved house I didn't have any of those settings in (though I will try as you've suggested). I knew it set up an email account in mail, which I've left because it's actual…

Just to clarify, things like my 'broadband PIN' were just used to match my account/billing details to this installation, it's not stored anywhere on my computer in any settings. I…

Never let the cable guy touch your mac. They only lay cable.. most don't know anything about setting up a mac.

Fixed it. I'd tried it with another powerbook, and encountered the same problem. Whichever book connected first got the external IP address from the router, the next to connect g…

Stuff breaks, wears out and dies. This is life. Getting the stuff replaced and having it work right away is cool. Congrats!

The WRT54G had been on 24/7 for over two years, then had been unplugged, stuffed in a box and stuck in a garage for a month. The last piece of networking kit to break on me was an…

I think you have to use the MAC address cloning feature of the LinkSys to clone the MAC address of your PB. When you first connect your PB to the modem and ran the setup software…

I think you have to use the MAC address cloning feature of the LinkSys to clone the MAC address of your PB. When you first connect your PB to the modem and ran the setup software…

Yeah I'd already tried MAC address cloning. I also went away for a week and left both the router and the modem switched off, which should have cured that problem were that the cas…

Have you tried updating the router firmware? If the old firmware is corrupted, that might solve the problem.

So what do you think?

Looks pretty good.

spam, and will be reported

didnt you make a thread about being banned from that site? Im starting to understand why.

I think you should stop spamming year+ old threads from different forums.

do i charge it first,b efore i do anythign with it? if so, how long? and after that, how long should i normally charge it?

charge till its full.

I'm going to be switching from DSL to Cable, and in doing so I'm gonna lose my static IP. Since I run a server, I'm going to need a dynamic dns service, and I'm wondering which th…

Try ZoneEdit (www.zoneedit.com). They'll cover you on both counts.

http://www.dyndns.org I've used them for about 4 years, they're great. I think it's $20 a year to use your own domain, so that doesn't qualify under your free requirement, but $2…

Quote: Originally Posted by bwahahax Since I run a server, I'm going to need a dynamic dns service, and I'm wondering which the folks here in the forum would recommend. Now for…

opps, meant this for marketplace