ah yes, for some reason, I had a hunch it was 4. So I can't have 3x 5.25" and 1x 3.5? Not a big deal, as I have the right cards. I just need to pull it out of my IIe. I Could try …

You are allowed 4 drives on a IIgs. 2 x 3.5" and 2 x 5.25". The 3.5" have to be connected to the IIgs 1st in the chain (I have the drive manuals from Apple).

The IIgs' smartport allows you to have 2 800K drives (mapped to slot 5) and 2 140K (slot 6)... if you really want another 5.25" drive, you'll need to install a controller card and …

Hi all. I was wondering how I should have the disk drives hooked up to my IIgs, and how many I can have. I have 3 5.25" drives, a 800k drive, and a external FDHD, which I tested an…

The software for your card is here. You can format the "rest" of the disk with HFS once you've got GS/OS up and running (and updated to a non-buggy HFS driver) to recover the othe…

It's an Apple II SCSI card, of which I just the found the manual here. But according to that manual, I have to use software provided with the SCSI peripheral to format and partitio…

...the full GS/OS install is intented to be made on an external hard disk, right? Click to expand... Right. Assuming my SCSI card works (which I haven't tried), will it …

Thanks! Next question (I haven't tried yet, just wondering): the full GS/OS install is intented to be made on an external hard disk, right? Assuming my SCSI card works (which I ha…

stock IIgs didn't have a fan, right? Click to expand... Right. Can I safely remove it? Click to expand... Probably. If someone put a fan in there, it was probably be…

I do have only a 2 Mb Ram card. I also have what I think is a SCSI card, not installed as of yet. So it should be ok, I hope. Thanks!

According to pictures of the IIgs innards I found on the net, stock IIgs didn't have a fan, right? Click to expand... Right. You can safely remove it if you don't have any unn…

Ok, it's time for some feed-back! I finally went further with cleaning those drives, since I recently got a nice Apple ][ Europlus and I needed the IIgs to be working in order to …

Status report: Made some changes to the G3's config file in regards to the modem port. In the GS, I used the monitor to do a 2 (Control-K) Return. Also tried PR#2. Both seem to ge…

Apple //c as a Dumb Terminal to my Mac mini Click to expand... I read that this morning, but had doubts about it, because the guy used a Mac mini without serial ports, whereas I …

Apple //c as a Dumb Terminal to my Mac mini

It's marvellous what this new fangled google thing will do... http://macosx.com/forums/mac-os-x-system-mac-software/2758-using-getty-serial-port-consoles.html

Some you might remember the desktop G3 I got awhile ago. Here's the setup: 1.) Desktop G3 with OS 10.2 and the usual printer/modem serial ports 2.) An Apple IIgs with the same se…

would u consider setting it up so we can dial in to it with telnet for the purpose of software development?

Not sure you got an answer to your question, so here's my shot at it: In addition to 120MB superfloppies, those drives will also read 1.44MB disks. Sadly, 800K (or 720K) disks are …

You want www.unna.org , as an earlier post said. There was no internal modem, because the MP was made to use PCMCIA expansion cards. The square cover you mention is more or less i…

Thanks for your reply. That's a bit disappointing that the fax function hasn't worked well for you. I have yet to try it out. I answered my CF card question but I have come up wit…

AFAIK, they were SuperDisk drives - the 120MB floptical things - and wouldn't read the 800/720k disks.

Anybody got a VST expansion bay floppy drive used in their Lombard or Pismo? If so, will it handle 800K disks, or just 1.44MB?

it will take some time until you have conquered the device. Click to expand... I've been learning that, but each time it does something I don't want it to, (I learn) and am ama…

it will take some time until you have conquered the device. Click to expand... I've been learning that, but each time it does something I don't want it to, (I learn) and am ama…