Actually, this; sorry. http://www.asante.com/downloads/legacy/asante5_6_1.sea.hqx

This is what you need. Click to expand... Thank you, but is that link correct? Does not appear to work.

You'll also need to ensure that you're plugging it into a 10Mbps hub - not a 10/100 switch - older Asante gear can't work directly with a 10/100 switch, you must put a 10Mbps hub b…

This is what you need.

As far as installing over LocalTalk, I don't recall that being possible. Click to expand... I installed 8.5 over apple talk to a power book 2300c, and it works fine, well its …

Does anyone have any experience with the correct drivers on a Asante MCNB Rev A? P/N is 09-00061-03 A3 I looked on Asante's website, and could not find anything on this card. I …

Does "nbplkup" run on the server show up the 605 as a workstation?

have you tried just installing an ethernet card?

My Quadra 605 running MacOS 7.6 does not see the shares on my FreeBSD 7.2 with Netatalk running. I can confirm that afpd and atalkd are running. The network is currently Q605 -&am…

I have my IIci on the web with a MacSense E440 NuBus ethernet card. I got the ethernet card new on eBay for $12. Woah, Thanks for the awesome tutorial, I'll setup my IIc…

Right... It seems to be a pretty good battery, I think my seller was actually quite conservative in his description. I'm going to treat it well and see how the runtime goes. LiIon…

If the battery holds any charge at all, cycle it through a few full charge/discharge use cycles, and you might find it improves.

Wow! I got it last night...nice clean 400mhz Pismo with 512k ram...dual boot...wonderful machine! I think I'm in love with Mac all over again! Booted it up last night, the airport …

I just scored on an OMP and Newton MP 130 with accessories which includes a Newton keyboard, modem, memory card, serial cable, AC adapter and Apple leather cases for each. The guy…

Meanwhile... I've been playing around with System 7 (.5.#) that is supposed to make everything more easy, but unfortunately Open Transport does not work with 68000's processors, so…

As a little piglet would say, "Oh D d d dear!" "Hold the shift key and click me again!" -Ozzy's adventures. Actually, the link above has information of the error your picture sho…

;D { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be loaded. Please tr…

Just got a 400mhz Pismo with good RAM, etc. on eBay. I'm excited to finally get a Pismo after all of these years! Working online with my Powerbook 1400s made me long for more speed…

There was a third party adapter to use Atari joysticks on an Apple II. Good luck finding one, though! At the time, Apple joysticks were as common and cheap as the Atari ones, so th…

Of course, option 3 is to yank the analog stick from the PS1 and just wire it straight into a custom controller. Soldering iron would be your friend there.

If the internal hard drive is larger than 4GB (unlikely unless it's been upgraded), don't attempt to install or format the drive over SCSI Disk Mode. There's a firmware bug that l…

As far as installing over LocalTalk, I don't recall that being possible. Click to expand... For example I have a "System 7.5 network install CD", you need a lower version and b…

I do have external SCSI CD drives, but not the HDI-30 adapter to attach it. As far as installing over LocalTalk, I don't recall that being possible.

If you have another old mac with a CD drive and have the necessary networking hardware (and I assume you do), stick the CD in another machine, turn on filesharing, and mount the CD…

Do you have a SCSI CDROM drive to boot the 1400 from? Install from another Mac with SCSI target mode?