What you need is a PDS ethernet card. It allows an ethernet plug to directly plug into your computer. The processor direct slot is the white or black socket on the left side of t…

I need help getting my LC III on the internet. I setup internet sharing on my Vista laptop, and it works fine on my iMac. I put iCab on the LC III and plugged in the ethernet cab…

Going to pick this one up on the weekend. The guy said it had CD and floppy modules, ethernet cards, fax modems, SCSI adapters and lots of software. He said it was in good condit…

avoid goop off, I melted a gameboy with that stuff Click to expand... If you have to use Goof Off, just carefully add one drop onto a cloth and try using the cloth. Any more of…

avoid goop off, I melted a gameboy with that stuff

Try Goo Be Gone or some other glue remover. Adhesive will keep any whitening chemical from hitting the plastic.

My old Mac SE, which I just finished de-yellowing, has a sticker stain. The sticker itself was from an aftermarket computer upgrades store, and the majority of it was transparent. …

You may need special drivers for that Farallon card - a lot of third party ethernet cards need their own drivers under System 7, rather than the drivers that Apple provides.

Nuke the HD and reinstall everything?

help? :'(

Have you used Asanté EtherTalk Installer v5.6.1? Ideallly the software is installed before OT 1.1.1/1.1.2 so that it cannot overwrite OT with older componets. It is by no means e…

Some of those Asante devices aren't full-fledged Ethernet->Localtalk bridges, but rather, dedicated printer adapter devices. Easiest way to do what you want to do is to get…

As far as I know, vintage Asante kit doesn't work at all with modern networking equipment. You need a 10 Mbps hub (very cheap) in between your DSL modem and your Quadra 605.

I'm having trouble getting my Quadra 605 connected to the internet through my LAN and DSL modem. The DSL modem is a Motorola Netopia 3347. The DSL connection is through Qwest. I …

Good News: 128mb stick worked; Color Classic now reports 135mb of built-in memory. I have virtual memory off. Any use for RAM disk now? Bad news: Gah! Now that I have OT 1.1.1 i…

I described what I did here: http://www.macmod.com/forums/viewtopic.php?f=36&t=3522 But just look around on newegg for Sil3512 cards. It is a really straight forward proc…

Stupidly enough, OpenTransport 1.1.2 is only available as an update. This means you have to install OT 1.1.1 first, and then upgrade to 1.1.2, which is a bit of a bore. Having said…

Go with 1.1.2, the files called: - OT_1.1.2-1of4.sea.bin - OT_1.1.2-2of4.sea.bin - OT_1.1.2-3of4.sea.bin - OT_1.1.2-4of4.sea.bin

Great, I'll give OT a shot. I found this website from apple: http://download.info.apple.com//Apple_Support_Area/Apple_Software_Updates/English-North_American/Macintosh/Networking…

I second Nico's suggestion to use Open Transport - while it is a bit of a memory hog as he said, it is much, much, much, much easier to configure than MacTCP, and supports DHCP, wh…

I've had some serious problems getting MacTCP to work with my Linksys WRT54GL router. Turns out those Linksys routers (and probably certain other brands as well) perform some kind …

Hi Folks, A few weeks ago, before my Color Classic was Mystical, I started a post at viewtopic.php?f=7&t=10285 trying to get it on the internet. Now that the system speci…

Thanks for that info and I am running tiger, it runs great on the b&w (well good enough anyways) since all it is running transmission and serving up files to my house (or w…

Get a couple cheap Sil3512 based cards from newegg or something and flash them with wiebetech TCS1-1 firmware. No drivers to install, bootable. Only down side is only two ports an…

Sorry, but I'm going to go into rant mode here, mostly because I don't like MrMacPlus' response. It is indicative, in my mind, of a phenomena that I refer to as anti-spam fascism.…