MacTCP manages to talk TCP/IP over LocalTalk by packaging each IP packet as a DDP packet and sending it to a "MacIP Gateway". Unless you have some component on your network doing t…

Now that you have a >4GB internal HD, make sure you never attempt to mount the 1400 to another Mac in SCSI Disk Mode. There's a non-fixable firmware bug that can lead to da…

I counted 3 row of 40 pins which is a PDS connector, not a Nubus. So this would add an FPU to the IIsi that doesn't have one and allows one to keep the PDS slot for an ethernet or…

JRL's right...its a right angle PDS adaptor board for the IIsi. While it will fit the SE/30, it would've originally been intended for the IIsi, as it has a FPU fitted. (the SE/30 h…

It is a Nubus angle converter for the IIsi/SE/30 if I remember correctly.

There is not a 6GB HD in. Runs much better however the CD drive is flaky at best. It will read the OS 8 and 8.1 CD but not the 8.6 CD. It will also not read Duke Nukem 3d (disk …

At least I can upgrade it so it is a bit faster. The HD is being a pain and freezing a lot when using OS 8 while trying to read a CD and other things. I think I will replace the H…

You can only mount the 166MHz module in the 1400 it came with. The 133, the third-party 180MHz and the G3 module are the only upgrades for the 117. Nice bundle of accessories wit…

Picked it up today 1400cs 117mhz/40mb/750mb Floppy Module CD Module Battery (untested) Ethernet PCMCIA Modem PCMCIA SCSI HDI 30 to SCSI 25 Pin Adapter Bunch of software (wi…

Try turning off images, java and animations. Should be much faster then. Click to expand... Otherwise, you'd need probably a 600MHz for "real" web browsing.

maybe I should make it 33mhz... Click to expand... Even so, it would still be pretty much the same speed at web browsing. Try turning off images, java and animations. Should be…

maybe I should make it 33mhz...

It's 25 MHz. What do you expect? :lol:

...And it's running!But. It. Is. Running. Very. Slow. And. Has. Been. Loading. The. 68kmla. Index. for. about. a. minute. and. is. not. even. close. to. done. yet. Click to expa…

...And it's running! But. It. Is. Running. Very. Slow. And. Has. Been. Loading. The. 68kmla. Index. for. about. a. minute. and. is. not. even. close. to. done. yet.

I didnt need that extension to connect to my iMac. But oops: i forgot TCP/IP... Do I want to connect via AppleTalk or Ethernet? My AppleTalk is set to EtherTalk, so i'm not sure.

Remember, you still need the Apple Ethernet LC extension too.

So...did you configure TCP/IP?

oh, and it is connected to my laptop and internet sharing, not the router. the router is ~100ft away

i HAVE a pds ethernet card. thats how i installed 7.6.

What you need is a PDS ethernet card. It allows an ethernet plug to directly plug into your computer. The processor direct slot is the white or black socket on the left side of t…

You may need special drivers for that Farallon card - a lot of third party ethernet cards need their own drivers under System 7, rather than the drivers that Apple provides.

Nuke the HD and reinstall everything?

help? :'(

Have you used Asanté EtherTalk Installer v5.6.1? Ideallly the software is installed before OT 1.1.1/1.1.2 so that it cannot overwrite OT with older componets. It is by no means e…