Hi! I have 64 MB(3x?) ram sticks for PM 8500 and processor upgrades 604-233 MHz and G4-400MHz Click to expand... Excuse me for barging into this topic: Do you still have the R…

Thanks. I have finally figured it out with a little bit of help: http://lowendmac.com/macdan/md025.shtml :beige:

There is such thing as a SCSI SSD so I believe it will be easy to find a ATA one. Another kludge you can use is:Getting a 2 Compactflash enclosure that goes to EIDE Put two 32GB C…

Thank You. Well, everything's going well, except that I can't get off this metal shelf from the back side of the 7100. Two clips are holding it. I don't want to break it up. Cli…

Beware. Some of the iMac G4 (later models before switching to the G5 processor) used DDR RAM on both the very bottom and inside. So make sure you have a model that uses SDRAM PC1…

Thank You. Well, everything's going well, except that I can't get off this metal shelf from the back side of the 7100. Two clips are holding it. I don't want to break it up.

Indeed, Merry Christmas and all the best to you lot this holiday season!

Yea I knew they only had one slot in the I-book I even just meses my 9 installed but that is another story and the added ram runs ines fine

merry xmas fellow RCers! :-*

The internal drive is an IDE, which doesn't seem to struggle much at all with the recording process. I have 50GB SCSI drives that could work a little better, but I haven't tried th…

I think you just need a phillips and flat head screwdriver. The screws in the back allow the top of the case to come off. the metal shelf holding the cdrom , HD, and floppy comes o…

Hey all, how to completely deassemble Power Macintosh 7100?

Hi, i don't know if somebody can help me, I have an old imac 350 MHz blueberry with 256 MB of RAM, I recently bought a 512 MB SDRAM 100MHz DIMM 3.3V ..... but when I put it on the…

cable(s) / to connect the midiman to performa 6116(Serial: 2 Mini DIN- 8) Click to expand... Mac serial cable aka Mac printer or modem cable aka LocalTalk/AppleTalk cable. 8 p…

Now i have a macman midiman and a roland mt-32 but with no cables. What type of cable(s) do i need to connect the midiman to performa 6116(Serial: 2 Mini DIN- 8) and the roland mt…

If you don't mind my asking, is the drive to which you are capturing an IDE drive or scsi drive? I've been thinking of using my beige G3 in a similar manner (I have an old analogue…

OS9 flies on a G4. The only thing that's slow is building the file system when it boots if you have a lot of files. I have one G4 with a couple of 1 TB drives and OS X installed al…

My RCWW10 page is up. http://conceitedjerk.tripod.com/retro10.html

chesty i will miss you so! Click to expand... Awww, sorry mate. I can't bear to see you like this. Just sent in my entry. I'll be resurrecting a few Amigas that have been co…

chesty i will miss you so! Click to expand... Awww, sorry mate. I can't bear to see you like this. Just sent in my entry. I'll be resurrecting a few Amigas that have been co…

OS 9 on my 1.25GHz MDD dual G4 screams, even though it is effectively only using one CPU under OS 9.

Actually, the tray loading iMacs required a minimum of PC66 too, exactly the same as the clamshell iBook. It was the slot-load iMacs that required PC100. So yeah, any RAM from you…

It's not too much of a worry, I have the hard disk on a sled at the moment that just snaps right into the Power Mac G3, and when I want to do the transfer, I power the system down,…

Ok thanks it just sucks with the 64mb of ram, yea I'm going to open my imac, later thanks

The iBook (Firewire) takes PC-66 SO-DIMM RAM. iMacs (the old ones) take PC-100 SO-DIMM RAM, and since PC-100 is backwards compatible with PC-66. Yes the iMac ram will work in the i…