considering tolerances you should be ok

Pin 28 on your Vreg chip has come loose from the logic board. http://www.xlr8yourmac.com/tips/iBookG4_vreg_repair/ibookG4_vreg_repair.html You don't have to scrape the laminate f…

I like them too, what machine can you get in your favorite color? And is the shape of en egg?

hahaha, thank you. i knew about this, even read the article, but - for some reason - thought only g3 ibooks are affected. well, i guess it's time to open her up again - this tim…

Some people say the iBook G4 has the "video chip coming loose from the PC board" issue. There is also a pin that comes unsoldered on a voltage regulator chip. The latter is fixable…

My poor Plus just had its second Analog Board die, most likely C1, as I have the vertical line down the middle of the screen. As I inspect the previous Analog Board I had in it, C…

Some people say the iBook G4 has the "video chip coming loose from the PC board" issue. There is also a pin that comes unsoldered on a voltage regulator chip. The latter is fixable…

I saw one for $10 at a yard sale. Always liked the graphite, so took it home to satisfy my curiosity. With 1GB of RAM, a 160GB disk, airport card, and a fan it runs Tiger quite wel…

hi everybody, it's been a while since i showed up here. glad to see the forum's alive and well. sadly, i have to post about a problem again. i have this ibook g4 (1,02 ghz model),…

who else thinks these iMacs rock!!!?? Click to expand... I do! That was the first computer I ever bought and it's still chugging along. Great investment. Upgrade the RAM and y…

just got me an iMac DV 2000. Graphite, slot loading dvd rom 400mHz my first G3 machine too. This thing's got it's stock 128Mb RAM and the stock 13Gb hard drive with the original in…

Or use Ciderpress. Or PM me and we can work something out, I have already converted them into 5.25 .DSK images, and could make you a .PO 800k image too if you want.

The Macintosh IIfx relies on both batteries to start up unfortunately. Mike Richardson (forum member here) sells them for cheap though and ships internationally. Check out his …

Dunno if this requires a new thread. But I've bought a Dayna E/II-T DaynaPort Nubus card. It says no errors. EtherTalk looks to work. I have Mac OS 6.0.8 with MacTCP. But I can't s…

or both, altho CA glue tends to be abit brittle, but i cant think of anything else that would wick its way into the crack as easy

Or you can try filling the crack with cyanoacrylate (aka Krazy Glue/SuperGlue)

ISTR that you shouldn't mix EDO and FPM RAM in one machine: can't recall if that's "no boot" bad, or "escaping magic smoke" bad.

I did get it, and it looks great. Not a lot of yellowing, either. Shipped in an original Power Mac 8100/80 box with styrofoam. Kinda neat to have that, too. The floppy drive bezel …

So did you get the 840AV - hows it look? I'm pretty sure I've a 32MB EDO SIMM in my 840AV - it won't hurt - give it a shot - but ideally you should go for FPM. ECC EDO RAM def…

The traditional way to prevent cracks from going further is to drill a small hole at the end of the crack. Not flash, but will save the plastic from further cracking. JB

Well I got a bunch of memory on craigslist the other day for REALLY cheap. Guaranteed to work or my money back. They're 72pin 60ns SIMMs, but they're EDO, and I wanted to make sure…

Finally got my Lombard back up to 512MB RAM. So nice.... Anyway, I noticed on the bottom of the case that there is a crack from the Apple logo to about 2/3rds of the way to the r…

As far as I know, the memory check can't be turned off in the Memory Control Panel on a Quadra. I seem to recall that it requires a PPC and MacOS8 — possibly 8.5 or 8.6. It require…

The eMac 9.2.2 disc is a good one. The version I have has Mac OS ROM 10.1.1, which is one of the highest versions. I don't think any bootable, 9.2.2 install discs have the higher 1…

For the records: A 9.2.2 CD bundled with a later G4 worked quite well. It´s still verry strange to me, but the bought 9.1 refuses to boot, but a 9.2.2 works (even if it was made fo…