Pro Tools card... worth anything? — #3
Not enough information
Found 2,486 posts across 1 forum.
Pro Tools card... worth anything? — #2
It is if you're a musician and want to use a vintage Mac.
Pro Tools card... worth anything? — #1
The PowerMac 9500 i will probebly be getting has a card that i have finaly identified as a Pro Tools card. Is it worth anything? I dunno where the thing that plugs into it is.
iMac Summer 2K doesn't like OS9 anymore! — #9
Macgeek417,
Try updating the drivers for the hard disk drive. See if OS 9.x will install from there. If it installs, then download Firmware Update version 4.1.9f4 (under OS 9.x'…
iMac Summer 2K doesn't like OS9 anymore! — #8
not the CD, but the harddrive.
iMac Summer 2K doesn't like OS9 anymore! — #7
Holding Option down, does it show the disc?
iMac Summer 2K doesn't like OS9 anymore! — #6
Oops... OS9 drivers...
iMac Summer 2K doesn't like OS9 anymore! — #5
I can only assume that the drive doesn't have the Mac OS 9 drivers installed (usually an option when installing OS X on a drive or preparing it through DU). Have you tried zapping…
iMac Summer 2K doesn't like OS9 anymore! — #4
the cd/dvd drive works fine.
when i boot from 9.0.4, it doesn't boot and just starts X
iMac Summer 2K doesn't like OS9 anymore! — #3
Does your DVD/CD Drive work in OS X? That may have bit the bucket, or your install media.
iMac Summer 2K doesn't like OS9 anymore! — #2
When you try to boot from the 9.0.4 CD, do you get the blinky, or an error message saying the disk is not compatible? I suspect that series needs a slightly higher version.
iMac Summer 2K doesn't like OS9 anymore! — #1
OK, my iMac had been running OS X for quite a while, but when I went to start up in OS 9 i just get a blinky ? floppy disk and a cursur. it used to like OS 9 but now it won't even …
iBook 600 16MB VRAM Driver - Where? — #14
I have a 9.0.4 image with updates to 9.2.2
I also have a 9.2.1 DMG, which does not boot but does install through OS X through classic.
What you could do is run an 9.2.2 Installer…
Lombard and Cisco Aironet? — #4
This website has all you need to get that card working
Click to expand...
thanks, the problem was a old firmware in the card, so i downloaded the last and work nice. thanks for t…
Lombard and Cisco Aironet? — #3
leosadv,
Specifically which Mac OS are you trying to use this card under, Mac OSX 10.3 or Mac OS 9.2.2? If it's 9.2.2, you could try and see if the card is compatible with the Or…
Lombard and Cisco Aironet? — #2
This website has all you need to get that card working
Lombard and Cisco Aironet? — #1
Hi!
I got a really cool lombard, running 10.3 and 9.22, ethernet connection works perfect, but i can't use the wifi card, it's a aironet 350series in any OS, the system just hang …
1366x768 clipped in OS 9? — #12
1366x768 is a non-standard resolution.
Click to expand...
Obviously.
1366x768 clipped in OS 9? — #11
1366x768 is a non-standard resolution.
profile — #1
Would it be possible to make the user profile page automatically contain a link to the corresponding wiki User: page? (One assumes people use the same name in both locations.) I …
1366x768 clipped in OS 9? — #10
Did you use something like SwitchRes to get into that resolution?
Click to expand...
No. OS 9 actually presented 1366x768 as a choice. Unfortunately it cuts off the last 6 col…
1366x768 clipped in OS 9? — #9
Did you use something like SwitchRes to get into that resolution?
1366x768 clipped in OS 9? — #8
I guess I'll just tell them it's defective (for my purposes)
Click to expand...
I thought the term was "fit for purpose", if you explicitly said you were going to use it with a…
1366x768 clipped in OS 9? — #7
I tried this monitor on my MDD 1.25 GHz for Tiger and the best resolution available was 1024x768!
This monitor is going back to the store. I guess I'll just tell them it's defecti…
Starting the Retrochallenge — #1
I have posted my lasted blog on my xanga site (where I have posted my entries in the past...)
http://doctorclu.xanga.com/
Or http://www.xanga.com/doctorclu should also work.
…