Hi WilyKat, about this card, do you want to sell it perhaps?  I have a Quadra 800 that needs an upgrade.

There is also the possibility to fix that 7.x bus error in software somehow. I did that on my Mystic but totally forgot what you had to do. Edit: now that was easy... http://colou…

That is true, but it is a 0 ohm, so it's just one solder bridge when you want to do the VGA mod.

You can remove resisters, but if at some point you want to do the vga mod you'll likely have to put them back...

I seem to remember just removing a resistor fixes this. I never did the video upgrade to my classic and it boots OS's before 8 just fine. I think this site details what I'm talkin…

Yes, but you will have to run system 8... a 575 board without the vga mod confuses system 7.5 and with show a bus error...

The biggest I have tried as 20 gigabyte (used a  powermac laptop hard disk with adaptor) .  Only issue is having 10 partitions as that fills up the screen with drives.  The Mac is …

I would suspect that these machines can accept drives up to 128 GB, like they're contemporary PC counterparts (I'm not 100% certain of this, but it seems logical that it would EDIT…

cute kitty!!

Yes it has a 90 degree adapter for C/Q 610.  Still not sure if I want to keep it for my C610 or sell it as a set.

You got a Q610 angle adapter? I think you'll be getting an email from Bunsen very soon. He was searching for one of those a while back IIRC. 

Oh wow I was literally using one about an hour ago.  Mines installed in a Quadra 800.  My hints are: Systems above 7.1 don't require the enabler You must physically turn off the …

I have one of these for my Quadra 605, just need to get it installed.  Only been procrastinating for 3.5 years!

660 is pizza box, too short for the card is why its not listed.  Although it works for the 610.  maybe the AV parts are in the way.

I think so. That's what I've been using whenever iCab 3.0.5 won't run, alongside some Netscape and IE for the sweet memories.

Excellent, thanks.

So you want to install a bigger hard drive? You will need: - 1 Phillips screwdriver - 1 flathead screwdriver - 1 40 pin IDE hard drive, any should do, even one scavenged from a…

Update: 575 board in CC with 37mb on the board with Mac OS 8.1 everything is running great! Now I just have to get the guts todo the 640x480 mod and figure out what's wrong with th…

Also I'll be getting a 32mb module in the mail soon. Hopefully that will work.I'm also in the process of getting my hands on a ppc cpu that I can swap out on the 575 board.

I took the 550 board out and got the 575 board working without bus errors. I was doing the resedit hack wrong :-/ Overall the computer feels alot faster, I just need to modify …

It is worth trying to clean and lubricate your floppy drive mechanisms, as per instructions that can be found here and there, including from some of our members. I find that my flo…

I've had the 550 board in the Color Classic and it's working fine with it. I installed 512k of vram on the board and it has 8mb of ram so far, with Mac OS 7.6.1 installed. I bough…

If I understand what you have done and are trying to do, the problem is: a) that 8.1 will not run natively on the 550, and B) that, to my knowledge, you cannot use the ResEdit ha…

I'd sure like to know where you bought your 128mb module. Mine fit fine, but the computer wouldn't boot, screen stayed black. I put the ram in the 575 motherboard and the 550 moth…

It fit fine with the 128MB module? Both of my 128MB modules were too tall, I had to file off the screw peg in order for it to fit. Is the 550 RAM slot located in a different loca…