The IIci and IIcx do use the same kind of mount, 700 should also since it is in a IIcx type of case.

This AppleVision 1710AV display was intercepted at the local recycler for $10, and it's a real survivor. It has minimal discoloration, a near perfect screen, and it even had the o…

Alright, thanks. I really want to secure the hard drive so I can run the Macintosh IIcx sideways without worries.

Probably so. They're not needed, in any case, unless you just like having the hard drive secured.

Could a Quadra 700 hard disk caddy be used in a Macintosh IIcx? I have my eyes set on a Macintosh IIcx on eBay which is missing the hard drive and the caddy, and I have a Quadra 70…

Simply put, if you turn on a fan to blow fumes from your nose while you solder, and if you then wash your hands after your solder job is done, you need not worry one bit about pois…

The author of this thread will not be convinced by any of this, but I offer it for the rest of you interested in knowing the caveats of going Pb-free in your soldering work: It's …

Ah yes, ye olde Zip drive problem! I too, have a 3400c and 100mb Zip module and indeed it does work fine under OS 8.6 as you mentioned, - perhaps because the Iomega drivers origina…

Hi All, as one can plainly see, I'm new to this forum, but not new to the mac. Been a beta tester for many years, Virtual Wings Pro, Fly! II, A-10 Attack, Quicken 3, Falcon 4, etc…

OS 10? Hey this is the 68KMLA yeah yeah, I know, 3400c is a G3, anyways, Zip drive works like a dream under 8.6 so guess a troubleshooting session with extensions and control p…

Did you try a PRAM reset? That has worked wonders for me on occasion, though admittedly under 10.3 more than 9.2.2.

I have never dealt with a MP120 personally, but it does have a socketed ROM, meaning that you can pull it and replace the ROM chip with another from (ideally) a MP120 that had been…

The VST drivers are simply rebadged Iomega drivers which are loaded. Restarting into my 8.6 partition, see what that does.

Dumb question I know, but you have installed the Zip drivers, right? Also, I've never dealt with one of those VST drives before - do they need special drivers, or do they use the n…

As per title, grabbed myself a sweet, brand new in box, never opened ZIP drive for my 3400c but it don't seem to work. When I insert a disk it grunts 3 times and then just sits the…

Sorry, my mistake, it's a MessagePad 120.

I'm impressed. Especially on how nice the external case looks. I actually salvaged all the Indigo Blue parts from my old 350Mhz, and I'm thinking about polishing them up a bit. Som…

Standing tall. Restoration complete. I've officially named her "Kiva", after the development codename for the last generation Summer 2001 750CXe based iMacs. Now I just need to pi…

6:53 PM The iMac is reassembled and seems to be taking well to the new CRT. The logic board eventually came good after a few resets (and after properly attaching all screws, go fi…

Well, it looks like the fault is in the PAV board itself. Not dead, but still very weak. Solution? The "donor" system arrived today. It's an Indigo G3, case is pretty scuffed but…

Yeah, I have first hand experience with a broken tube.. Still alive to this day.

Yes, when not discharged a CRT can hold up to 27,000 volts. However, there's also an even bigger risk of the CRT neck (which is VERY fragile!) being cracked or broken if handled in…

I hope this doesn't seem like thread hijacking. It's kinda related... What are the risks of disassmbling an iMac down to the CRT? I'm always heard that CRTs are oh-so-dangerous be…

iMac600, if you need parts, let me know. I've got a iMac DV SE with 500 Mhz G3, Firewire 400, that currently has a bad P.A.V. Board I need to get rid of. It's either that or I've…

...is knock, knock, knockin' on heavens door. Since i've owned it, predating even my involvement on these forums, it's been a loveable old machine with CRT problems. The display f…