Yep, I got the Centronics cable, it plugged right into the back of the CD-ROM Drive. Thanks for the reminder.

make sure, that fits onto a cable to change it (which is fine if you have a 50 pin <-> 50 pin centroncis cable)

Yeah I did some research shortly after I posted the question. You are correct it's a Centronics. I found the adapter here. http://www.computercablesource.com/scsi-adapter-centroni…

http://www.google.com/products/catalog?hl=en&client=firefox-a&channel=s&rls=org.mozilla:en-USfficial&hs=bEY&q=50+pin+to+25+pin+scsi+adapter&…

I need a 50 to 25pin adapter for the cord to plug it into my Macintosh Color Classic. I ordered one and got it today but its a tiny 50pin on the adapter and not the large wide 50 p…

I burned this ISO under Windows and ImgBurn and it works like a charm... Snow Leopard makes unreadable CDs with this ISO. I tested it with the same CD-Rs.

Because I had my first experience with remote transmission about twenty years ago, using a modem to connect to simple mailboxes, I value the bandwidth (as anyone of us appreciates …

my problem is at C13. i am looking in that general area to see where to scrape exactly with the idea of exposing the correct copper wire. Click to expand... I don't have any SE…

Hi Jason, I responded to your email a few minutes ago. I see that JDW gave you basically the same advice I did, but in better detail. You didn't mention the reverse polarity pro…

a big thanks to JDW for such a thorough reply. just to be clear i am *not* that dexterous with a soldering tool. in fact, this whole process of cap replacement is new to me. my pr…

I have never "partially recapped" a board and then tested it. So I cannot speak from experience in that regard. But what I can say is that if you have the caps properly oriented …

i have 220uf 35v for 220uf 16v can i use this ? and the surface pads have come up off the board for one of them. how will i make a good connection now for that capacitor?

I received my replacement capacitors from Trag (thanks, Jeff) and have started to solder this morning. I have three finished, when I decided to put the board back and try it out. O…

The ones from Trag have a thin, red line on the one side. That's the positive side. Cheers, Anders

the tantalum ones are not marked positive or negative. how do i know which end is which ?

yes, can type almost always indicate the negative side, where as tants are marked on the positive side

I'll venture a guess; you've put the capacitor in backwards. The tiny stripe on the capacitor should point towards the "+" on the motherboard. I *think* this is opposite the factor…

I received my replacement capacitors from Trag (thanks, Jeff) and have started to solder this morning. I have three finished, when I decided to put the board back and try it out. O…

Another good option, although not free, is FWB CD-ROM Toolkit. Click to expand... That might work because I have an Apple CD 300i Plus that I'm trying to use. Try using …

There's nothing wrong with a 2-liner. I wouldn't go any further than a 3 though. I cut mine down as such and it seems to work fine.

Another good option, although not free, is FWB CD-ROM Toolkit. Versions earlier than 2.0 will work on both System 6 and 68000 processors. I currently have an Apple CD 300e attached…

A few of notes: - CD Sunrise will only support HFS CDs. So ensure that you are creating HFS CDs if you are using a CD drive to transfer files onto the SE. - Apple's CD driver wi…

I'm located in Rhode Island. If you can take pics and are willing to ship out, I might be interested. I never used a CD-ROM drive like this, I had to order a 50pin SCSI cord for i…

You will have difficulty reading many discs if you are using system 6 (I recommend upgrading to 6.0.8 in any case). You will need to find the desktop manager init and place it in y…

Would this get the job done? http://cgi.ebay.com/CD-ROM-Caddy-for-older-Caddy-CD-ROM-Drives-~LAST-6_W0QQitemZ230412204911QQcmdZViewItemQQimsxZ20091214?IMSfp=TL091214232007r6542#ht_…