Skip to main content
Search titles, bodies, and author names
Found 20,703 posts across 1 forum.

3400 HD upgrade instructions — #15

Greg2384828245, We could NOT use the drive in SCSI Disk Mode. Instead, we had to use an Ethernet Crossover cable and set up a "Mini-LAN". Another option was to set up an IR connec…
MacNN Troubleshooting

3400 HD upgrade instructions — #16

Said earlier: "Do you know the url for full tech manuals for the PowerBook G3 bronze keyboard and FireWire models?" reply was: "Start here. Pick the manual you need. http://www.a…
MacNN Troubleshooting

3400 HD upgrade instructions — #17

Just installed a Travelstar 6GB in 1400. I think if you partition you can still use the PB in SCSI disk mode. Won't get to try it here for a week or so. Maybe there were problems…
MacNN Troubleshooting

Firewire to PCMCIA card for a PB 1400 — #2

Ratoc, Newer Technologies and a few other companies make firewire PCMCIA cards. I don't know if you'll have to upgrade the cardbus to except 32-bit cards though.
MacNN Troubleshooting

Firewire to PCMCIA card for a PB 1400 — #3

The Firewire and USB cards out there require Cardbus, which is 32-bit versus the 16-bit PCMCIA. A 1400 cannot be made to use a Firewire or USB card for that reason. It cannot be …
MacNN Troubleshooting

Firewire to PCMCIA card for a PB 1400 — #4

I was reading the Apple TIL about the 1400 and they mention the fact that if a larger card is to be used..something about Type 1, 2 and 3s, that one just uses the lower slot to acc…
MacNN Troubleshooting

Firewire to PCMCIA card for a PB 1400 — #5

The PCMCIA standard (which was superceded by PC Card and CardBus) used to designate the thickness of the rear portion of the cards as Type 1, Type 2 or Type 3. Type 1 was SRAM or …
MacNN Troubleshooting

Firewire to PCMCIA card for a PB 1400 — #6

Check out this thread, too, http://forums.macnn.com/cgi-bin/Foru...ML/000629.html and/or do a search over at MacFixIt if you want to read more about it. Or call the guys at MCE…
MacNN Troubleshooting

DVD Sound — #1

The sound from my PowerBook 2000 DVD movies are OK at home or certainly when amplified by my VCR or TV. But when I are riding on a plane with ear phone pluged into the sound out p…
MacNN Troubleshooting

DVD Sound — #2

hi, well its good to see more of us islanders using more macs (pismo 500 and very HAPPY). I just noticed that the other day sound out was kind of soft also.so if i find a soluti…
MacNN Troubleshooting

DVD Sound — #3

The headphone amp on the powerbook is not very powerful. Your best bet is to get some decent in-ear headphones. Check the impedence on them. The lower the better. Also, if you …
MacNN Troubleshooting

DVD Sound — #4

one word: Fostex okay, more than one word... Fostex h'phones do not have a mini-plug and you'd have to use an adapter (phonoplug to miniplug) but hey those Fostex can kill, i used…
MacNN Troubleshooting

DVD Sound — #5

I don't understand this. My Wallstreet II blasts my ears off at any volume higher than 1 if I'm using earphones, and I'd really be happier with a volume setting of 0.5 if I could …
MacNN Troubleshooting

DVD Sound — #6

If you look in the sound control panel, under OS9 you have Output, which controls the general output volume, and you have a speaker setup, where you can adjust balance, volume, etc…
MacNN Troubleshooting

DVD Sound — #7

The thing about DVDs is that, so that loud sounds come out LOUD, regular sound is recorded onto the disc at fairly low levels. Another thing you may want to try is active (i.e. b…
MacNN Troubleshooting by tooki

Brand new Pimso DVD drive vibrates?! — #1

howdy all, i'm typing this post from my brand new pismo500. just got it this morning, and it was pretty darn exciting to fire it up. ok, so here's my question... of course i wa…
MacNN Troubleshooting
mp.ls