Check your email. Let me know if it doesn't come through intact.

Quote: Originally posted by appleuzer: hello, i currently own a igamewizard, and i cant find the CD for it. I have searched the net far and wide for copies of the QD3d a…

Quote: Originally posted by bluesea: Check your email. Let me know if it doesn't come through intact. Hi, I did not receive e-mail, but just a notice from MacNN, in…

I've got a plan drawn up at this stage for a Rack/MT/Desktop case for a G4 sporting a 4 tray hot-swappable SCSI or Firewire RAID setup. Right now, I'm tring to see if there is any…

You may have a bit of demand for this as Pinnacle has announced a High Definition Non-Linear Editor for Macintosh only (www.pinnaclesys.com.) However, we are talking about extreme…

been searching far and wide for a way to open my ibook to replace the speaker which just blew... any docs available on the net?

http://caslis.com/ibook/ibdrive.html Lots of screws, but the speaker is available early on in the process... Good luck! drewman

Getting to the speaker isn't too bad, and as long as you are really carefull with the screws, as the metal is quite soft and they get cross threaded quite easily. If the speaker ju…

Has anyone here successfully installed a second internal IDE HD on a Rev. 1 Yosemite G3 (HD brackets side by side, not stacking). The Apple TIL says its not possible, but xlr8your…

I've got a 27 gig IDE HD slaved in the zip bay (slave to the DVD rom drive) and a 6gig (salvaged from my old G3 Beige) slaved to the main 6gig IDE in my BW, which is also Rev 1. I'…

You can also buy a cheap PCI ATA card and run both drives off of that, or leave the stock drive there and buy *two* new ones to run off the ATA card.

Don't put the hard drive in the zip bay...I've heard it's not designed to take that heat and can screw things up pretty bad.

On the Rev 1 B&W the computer will recognise both Master and Slave IDE hard drives, but support for both devices on the same bus wasn't all the way there. You can use each ch…

Quote: Originally posted by Sgt. Baxter: You can also buy a cheap PCI ATA card and run both drives off of that, or leave the stock drive there and buy *two* new ones to …

Quote: Originally posted by Doug Brown: Don't put the hard drive in the zip bay...I've heard it's not designed to take that heat and can screw things up pretty bad. …

Quote: Originally posted by AP@cultfiction.com: what happens cuz that's where I put a slave 26 gig ide..... the mounting bays at the bottom really suck.... I've be…

Machine: rev1 B&W G3 I've also got a 27BG IDE drive in the zip compartment and it's been fine for 5 months now, with the machine sometimes running for 48hrs at a time, never ha…

The topic says it all. ------------------ People aren't as dumb as you think. Wait, what was I thinking, 90% of the world uses WINDOWS! You don't like Macs? Good, more for me.

Radio Shack.

Once you pull the original, yellow, jumper block off the pins, you can use the individual SCSI ID jumpers for internal hard drives to change the settings. They work fine in my B&am…

Just use a bunch of ordinary jumpers.

I just re-arranged the jumpers within the jumper block itself on my Beige 266 (now a 300), I don't know if its the same on the B/W.

I was just wondering if, in theory, I can simply pull out my G3/300 from my beige G3, and replace it with a G4? Will it function properly, and will I be able to use Alti-Vec? Wil…

You would simply require a [expensive] G4 ZIF socket upgrade card for this to work, oh, and be sure you have the Royal VRM, not the bad one... the VRM is this square module under/r…

After the WWDC I was drooling over the prospect of getting OSX. Then it hit me. The iMac Game Wizard uses two extensions: Game Wizard MacGlide and Game Wizard RAVE. Since OSX is…