Overclocking G3's? — #32
I just overclocked my B&W G3 350 to 400MHz. The CPU temp was 31� without any extra cooling. I installed a new heatsink and cpu fan and found that it had no effect on the CPU …
Found 23,233 posts across 1 forum.
Overclocking G3's? — #33
As promised here is my water cooled heatsink. <A HREF="http://vms.www.uwplatt.edu/~spinkb/water_heatsink/">ht tp://vms.www.uwplatt.edu/~spinkb/water_heatsink/</A>.
Overclocking G3's? — #34
"This was a good move on Apple's part because for the cost of a plastic jumper block (maybe 2 cents?) they can charge you almost $1000 more for the 400 MHz version vs. the 300 MHz …
Overclocking G3's? — #35
Nilssen, the 300, 350, and 400 mhz processors are all the same yes, in some ways... some of them are copper and some arent, the copper ones being from IBM. and one of the biggest …
Overclocking G3's? — #36
I remember reading about some company that made super-cooled peecees (it at least a year ago). I emailed them to see if they sold the chasis seperately from the inards. It turned…
Overclocking G3's? — #37
Thought I'd answer my post from a few days ago...
If any of you want to upclock your 233-266 to 300 the QUICK and EASY way:
Contact Output Enablers www.io.com/~oe or oe@well.com.…
Overclocking G3's? — #38
www.kryotec.com sells cooling systems that cool a processor down to -40 C. Yes, -40 C!!! Unfortunatly you cannot buy one of these refrigeration units without it being pre connecte…
Overclocking G3's? — #39
��Quantum Fusion�� read this please agin:-)
Tanxxxxx for u words....
Can't u post the jumper settinigs here (o=none, x=jumper) My temp is 26 deg.c.
But the settings for 420/120 do…
Overclocking G3's? — #40
I know all this overclocking is nice, but I don't want to ruin my warranty, and I don't want to ruin my motherboard. I find there are also cost efficient ways to increase your sp…
Overclocking G3's? — #41
Other alternatives are great...but the benefits aren't as much as you make them out to be. Having virtual memory on isn't as much of a slow down as it used to be in the past. (sys…
Overclocking G3's? — #42
eeeh, Intel Pentium III's are extremely hard to overclock, why is Intel doing this, I dunno, but they did. Sure, Celeron's are better to OC, but Intel is clearly trying to make ove…
G3 6100 and Linux — #1
Hello, I have a Sonnet G3 upgrade in my 6100.
Without this card, MkLinux works. However, this card doesn't support MKLinux. I have asked Sonnet many times about this, and I always …
G3 6100 and Linux — #2
The problem is the NuBus slot in your 6100. I have a NEWER 210 G3 in mine and face the same problem. There are not many NuBus machines out there, comparatively speaking. In the …
G3 6100 and Linux — #3
I too have the NEWERtech 210 G3 upgrade in my 6116 PPC Performa. It's been a real system saver - until I boot into Linux. I read somewhere that you could change the type/creator of…
G3 6100 and Linux — #4
Try: http://www.erf.net/~brd/mac/6100faq.html#linuxg3
It doesn't say how it works or an e-mail address for the postee but the guy who runs the website might know.
G3 6100 and Linux — #5
I *THINK* you need to install Linux WITH the card in the slot and WITH it active. If you install Linux with the card inactive, and then activate the card, it might screw up the har…
G3 6100 and Linux — #6
Newer G3 cards on Nubus Computers are working
with Mklinux
(I ' m using a 7100/80/Av + Newer g3/240
Sonnet's don't ...
It would be a good idea to subscribe to mklinux-setup Mailing…
USB PCI Card Trouble?? — #1
i recently put a pci usb card in my performa 6500 and am using apple developer usb drivers (1.2f2) in my computer. i purchased a macally usb keyboard and i cannot turn on my comp…
using iMac as monitor for B&W; G3 — #1
Can anyone tell me how to use my iMac as the monitor on my G3 tower. I have heard it to be done, and need to know how.
using iMac as monitor for B&W; G3 — #2
Now I have never done this and never heard of it being done but I know that if you take the bottom casing off of the iMac that the monitor cable is there. I guess you can connect …
Overclocking Beige G3's — #1
All this talk about overclocking has me wondering what I can get out of my beige G3/266 Minitower. Anybody tried that?
Overclocking Beige G3's — #2
I too wouldn't wind knowing how to get my Beige G3/300 MT upto 333Mhz if possible. I've seen how to get a 233 faster but never the 300.
Blue G3 100BaseT FULL DUPLEX — #1
Does anyone know how to change the duplex setting of the built-in 100BaseT ethernet from the current HALF duplex to FULL duplex without having to get another NIC from another vendo…
Blue G3 100BaseT FULL DUPLEX — #2
Ckeck your hub setings, I run a Macsence switch and I get default full duplexing. If your hub only handles half then the card will sence and switch to a half duplex.
-------------…
Blue G3 100BaseT FULL DUPLEX — #3
Just reading the docs on the onboard NIC and the secret is that your hub needs to be autosensing and full duplex capable. Meet those conditions and the B&W will connect at 100B…