The rule regarding games/pdas is the result of sheer laziness and ignorance on my part... there just isn't a convenient cut-off as there is with computers. If anyone has any ideas …

most 10 year old game systems are 2 generations old, leaving them with (at best) small meg's of memory, and 10's of megahertz Click to expand... most 10 year old game systems a…

most 10 year old game systems are 2 generations old, leaving them with (at best) small meg's of memory, and 10's of megahertz This rule does need to be revised, under the current …

Beats me, mate. I don't write the song, I just sing it Still, if the 6100/66av were allowed, I'd resurrect mine in a heartbeat!

PPC ist verboten. Click to expand... If 10-year-old game systems make the cut, why not a 15-year-old computer? (Heck, a Quadra 840 may very well be faster for many tasks than …

PPC ist verboten, mein freund: 2. In order to qualify, computer systems must use a pre-pentium processor... in general, this means 486 or below, 680x0 and pretty much everyt…

Alright, if I can dig the machines out of storage in the next two days; I'm going to use only machines that were current the day my step-son was born (September 25, 1994.) This me…

Or the Gameboy Colour...

The guideline for games and PDAs is ten-years-old as of the start of the competition, so you'd be a little shy with the GBA... developing something for the original GB would defini…

Hm, I am thinking of doing something with my Gameboy Advance (32 bit 16MHz ARM, original release date March 2001). Is that retro enough? I mean I have a couple of original 8 bit …

From what I've read (never tried it) those two-slot adapters will often only recognise a single card when used in a Mac.

Thanks. I have finally figured it out with a little bit of help: http://lowendmac.com/macdan/md025.shtml :beige:

There is such thing as a SCSI SSD so I believe it will be easy to find a ATA one. Another kludge you can use is:Getting a 2 Compactflash enclosure that goes to EIDE Put two 32GB C…

Thank You. Well, everything's going well, except that I can't get off this metal shelf from the back side of the 7100. Two clips are holding it. I don't want to break it up. Cli…

Beware. Some of the iMac G4 (later models before switching to the G5 processor) used DDR RAM on both the very bottom and inside. So make sure you have a model that uses SDRAM PC1…

Thank You. Well, everything's going well, except that I can't get off this metal shelf from the back side of the 7100. Two clips are holding it. I don't want to break it up.

Indeed, Merry Christmas and all the best to you lot this holiday season!

Yea I knew they only had one slot in the I-book I even just meses my 9 installed but that is another story and the added ram runs ines fine

merry xmas fellow RCers! :-*

The internal drive is an IDE, which doesn't seem to struggle much at all with the recording process. I have 50GB SCSI drives that could work a little better, but I haven't tried th…

I think you just need a phillips and flat head screwdriver. The screws in the back allow the top of the case to come off. the metal shelf holding the cdrom , HD, and floppy comes o…

Hey all, how to completely deassemble Power Macintosh 7100?

Hi, i don't know if somebody can help me, I have an old imac 350 MHz blueberry with 256 MB of RAM, I recently bought a 512 MB SDRAM 100MHz DIMM 3.3V ..... but when I put it on the…

If you don't mind my asking, is the drive to which you are capturing an IDE drive or scsi drive? I've been thinking of using my beige G3 in a similar manner (I have an old analogue…

My RCWW10 page is up. http://conceitedjerk.tripod.com/retro10.html