Hey guys, can someone help me enable Quartz Extreme on my PCI Radeon 7000 WHILE still being able to use my AGP card? I need to use both because this quicksilver I have is needed fo…

I knew I had seen something more about this somewhere, so went digging.... The 3400c is very like the 2400c, and for our purposes the key thing is that its cardbus capability is s…

If the machine is cardbus enabled, will this theoretically improve the drive's speed? If the machine is cardbus enabled, will this theoretically improve the drive's speed? Click…

my guess would be only if the adapter ur using is cardbus and not pcmcia

I am running the system via a pcmcia compact flash card. Click to expand... I am thinking about doing the same on my newly revived 2400c. What is the performance like on yours,…

I normally put all of my drives in single master mode anyway if its the only drive on that IDE channel. But with the WD 120gb HDD in my Beige G3 AIO i could have the drive set in M…

Indeed...I remember a couple of years ago when I was putting one of their drives into my Performa, how I had to jumper it specially for the Performa, in fact I think it was actuall…

And now you know that WD does it differently (with thought, of course). It's a caveat worthy of the attention of all of the enlisted here. de

All fixed...turns out the drive had to be set to single drive...works fine now

Indeed I have! But all I get is a blinking question mark :-/

did u set the startup disk to the panther partition?

So, about 5 years late, my iMac 333 is finally running Panther! However...there is a slight (big) problem.... The internal 24x notebook CD-ROM drive, well, lets just say its se…

The hard disk had been upgraded at some stage in the past an was not touching its heatsink. Click to expand... Yeah, the hard drive's heat spreader only contacts 12.5 and 17mm …

Quick update. I opened up the 2400 which was a substantial task. The hard disk had been upgraded at some stage in the past an was not touching its heatsink. Also the thermal past…

Looks like you're right... after reading the manual I'm inclined to agree it's a retrofit, in which case there's probably little chance of the original circuitry being in the box.

Doesn't look home-brew to me... my guess would be that they used the same back panel for both the SCSI version (as pictured) and the Smart Port version for the IIc. The IIc version…

Doesn't look home-brew to me... my guess would be that they used the same back panel for both the SCSI version (as pictured) and the Smart Port version for the IIc. The IIc version…

This QC10 on ebay appears to be an upgraded, retorfit floppy disk model. Anybody know if Quark sold them this way? with all the holes in the box it sure seems like a home-brew job…

The flickering is a sign of insufficient voltage. Either the battery is marginal, or the power regulator board has a problem. The crashing could also be due to power instability. …

Using OF commands, after amending the settings for thermal-info I got the fan to turn on straight after booting, by setting them to 01010200 00000000 01010200 00000000. With the o…

I've got a 2400c spec'd very similarly to yours. My NUpwr is the 240MHz variety. Anywho, I couldn't say anything for sure about the first issue. It could be that something's aging…

If it crashes with intensive programs maybe it's overheating?

Hi everyone. I have a Powerbook 2400 with a few problems. I wonder if any of you knowledgeable people can help me out? My machine works pretty well. It has a NUPower G3 upgrade, …

Hi All, I've been delving around in open firmware on my Pismo to see if I can control the internal fan, or at least set a better temp. for it to come on at. In the device tree I'…

Am trying to revive a dead 2400c/180 in the next week or three. As detailed on this page, among a handful of others in English, there are some dozen or more fuses in the innards o…