"Secrets" is by far the best Mac book out there. It covers all those things the other books don't and includes some pretty detailed historical reference sections. The software is a…

. . . circa 1999, List Price: $49.99 . . .Complete WITH the original CD! 8-o This is just perfect for my OS 9.2 lifestyle! Snagged it at Goodwill, just now, on the way t…

By chance a friend dropped by with a broken SE today, giving me an excuse to open one up. There is indeed a focus control. Have you tried adjusting it? If it has no effect, then fo…

two stripped LCs (I'll gladly sell one to you for cheap olePigeon) Click to expand... Yaaay!

Guy came over today; very friendly! I got: one complete IIsi one IIsi case two stripped LCs (I'll gladly sell one to you for cheap olePigeon) LC II with LC 475 upgrade, comple…

you have to make an adapter in most cases, i say most because there is suppose be one that will work

I'm just annoyed that my M0100 doesn't work with my //c.

Alright, I think the 9 confirmed mice means there's not a 6th pin...unless someone wants to check one more so its an even number

Hi Gary, Did your tech check R26 to see if it is shorted or open? I ask because I've seen this exact problem on three or four Mac Pluses and Pina's recommendation to check the c…

We'll see how the CPU swap goes before I decide on overclocking. I actually have a Q605 and an LC475 as well as two 68040 donor machines, so I have some room for error. My end goal…

nb: 40MHz is not always stable though. A heatsink/fan for the 040 would be a good idea. http://homepage.mac.com/schrier/q605_40.html Output Enablers sell some useful parts. …

Just checked mine, and I think that it's safe to say that these mice are pin six free

I'm finally getting around to swapping the 68LC040 in my Q605 for a full 68040. I have a 68040 donor machine ready to go, put I have no experience pulling chips. Any advice on wher…

Just lever the the cpu with a thin knife, SLOWLY. I would suggest no more than 1mm or 1/32" before moving on to next side and repeating, the pins are only 3mm / 1/8". Ok you cant r…

epic, hm that's a good word for it

No Pin for the Win! Yes, I am epic.

I checked the M0100 and the Mouse IIe; both are without that pin.

ok, cool, now i just have to find a mac for this mouse!

No pin six here

Just to confirm the 2 other posts, I just checked my 3 M0100 mice, one is new in bag and one has been used once, and none have pin 6.

What kind of CD did you try? Are you sure it's undamaged? Is it a burned CD, or a factory-pressed one? If the former, expect trouble in older drives. Is it an HFS disc? HFS+? ISO?…

My M0100 has no pin 6, and I'm sure it's not just 'broken off'.

I usually use a thin screwdriver. I know, not the recommended way of doing it, but as long as you are extremely gentle, you should be fine. I've been doing this for years, and have…

Apparently pin 6 is not connected.