Unless you have a proper IC puller, or some other device that can get under and lift both sides at the same time, then the trick is to ease each side up a very small amount at a ti…

I guess every machine is different. Since the addition of the 3rd drive, it's been noticeably warmer in my room which is nice because the heating for the house isn't so great u…

A broad (1"+) wood chisel can be used to pry the processor out of the socket, working slowly one side at a time. You don't hit it, you turn it like you might a screwdriver, and you…

I'm finally getting around to swapping the 68LC040 in my Q605 for a full 68040. I have a 68040 donor machine ready to go, put I have no experience pulling chips. Any advice on wher…

i was looking around in a local thrift shop today, and i found an apple m0100 mouse. it has the serial type connector, but pin #6 is broken off. for $1 i could not pass it up! i lo…

Hmm... That is weird. I have my Sawtooth G4 maxed out with three HDs and it's DVD drive, Everything worked fine. I know yours is a quicksilver, but they're not that far apart. I h…

Switching both to cable select worked. Which is strange because I've always been told that optical drive buses on mac's weren't "smart" enough to know which is which and label them…

I get an address error. Can anyone help???

I install the CD Sunrise driver today with System 6.0.8 and when I stuck a CD in the drive I get a error of some sort (I can't remember right now). What else could I try? Thanks,…

JDW is quite correct -- poor focus is not caused by a logic board problem (except, perhaps, indirectly by loading the power supply; that possibility is quickly checked by simply me…

How Strange!

The guy gave me some pics of the internals. http://5249161678509350185-a-1802744773732722657-s-sites.googlegroups.com/site/aquaregia27/home/portable_scsi.JPG?attachauth=ANoY7cones…

The guy gave me some pics of the internals. http://5249161678509350185-a-1802744773732722657-s-sites.googlegroups.com/site/aquaregia27/home/portable_scsi.JPG?attachauth=ANoY7cones…

SCSI HDs (including a battery-powered external for PBs) Click to expand... Oh maaaannnn.... Is that one of those Powerbook-grey cases for a 2.5" SCSI HD? I would love one of …

I have never had any caps "knocked off" when I have removed or inserted SE/30 logic boards. But I used to be a service tech for the now defunct MicroAge so I know how to exercise …

Dec. 31 /09 Almost New Years Eve: Thank you all good folks who replied to my problem. Phreakout (Joe), I enjoy your postscripts. Here's one I just made up: (Hey Joe, where you…

Thanks!

Good luck!

I'm not sure yet; the guy is coming over next Friday.

WOW!!! :O If there is some good software in there please upload images

Cool, what 68K software did you get?

THANK YOU LEMSWAP. Performa 6360 with AV kit sans fan Multiple IIsis, including a clean IIsi case Multiple LCs Apple processor upgrade (PCI) Multiple SCSI HDs (including a bat…

Try setting the jumpers on the back of both drives to CS (cable select). Also, take the RAM down from 1.25GB to say 512MB, if possible. Sometimes OSX will do funky things when yo…

JDW is correct on what he has said. Most display issues are centralized around analog technology, hence the analog board. If it were a problem centralized with the logic board, y…

unless that filter chip is flooding the system with noise, course if it were enough to cause focus issues on a totally different system its going to cause all sorts of havoc