Overclocking G3's? — #27
Can I overclok Crescendo cards from Sonnet ?
I have a 240-250 MHz Processor card !
Tanxxxxx a lot.
Found 20,262 posts across 1 forum.
Overclocking G3's? — #28
OK,
This water cooling sounds great. I have been discussing the idea with several people, but not for the purpose of speeding things up (neccisarily), but to quiet things down.
…
Overclocking G3's? — #29
I recently bought 2 B&W G3s ...
Both 350 DVD.
I played with them and found that one of them had a hoter CPU.
After removing the CPUs from the Socket7 i saw that one was an IBM …
Overclocking G3's? — #30
DAN,
Hi. All of the jumper settings can be found at: www.xlr8yourmac.com/G3-ZONE/yosemite/OC.html
Like I said, 120MHz is the only other truly stable setting concerning the other…
Overclocking G3's? — #31
I just sent off for a jumper block from Output Enablers that will fit my Beige 266MT for 300mHZ upclocking. Anyone used these blocks? Did you run into any problems, and can the c…
Overclocking G3's? — #32
I just overclocked my B&W G3 350 to 400MHz. The CPU temp was 31� without any extra cooling. I installed a new heatsink and cpu fan and found that it had no effect on the CPU …
Overclocking G3's? — #33
As promised here is my water cooled heatsink. <A HREF="http://vms.www.uwplatt.edu/~spinkb/water_heatsink/">ht tp://vms.www.uwplatt.edu/~spinkb/water_heatsink/</A>.
Overclocking G3's? — #34
"This was a good move on Apple's part because for the cost of a plastic jumper block (maybe 2 cents?) they can charge you almost $1000 more for the 400 MHz version vs. the 300 MHz …
Overclocking G3's? — #35
Nilssen, the 300, 350, and 400 mhz processors are all the same yes, in some ways... some of them are copper and some arent, the copper ones being from IBM. and one of the biggest …
Overclocking G3's? — #36
I remember reading about some company that made super-cooled peecees (it at least a year ago). I emailed them to see if they sold the chasis seperately from the inards. It turned…
Overclocking G3's? — #37
Thought I'd answer my post from a few days ago...
If any of you want to upclock your 233-266 to 300 the QUICK and EASY way:
Contact Output Enablers www.io.com/~oe or oe@well.com.…
Overclocking G3's? — #38
www.kryotec.com sells cooling systems that cool a processor down to -40 C. Yes, -40 C!!! Unfortunatly you cannot buy one of these refrigeration units without it being pre connecte…
Overclocking G3's? — #39
��Quantum Fusion�� read this please agin:-)
Tanxxxxx for u words....
Can't u post the jumper settinigs here (o=none, x=jumper) My temp is 26 deg.c.
But the settings for 420/120 do…
Overclocking G3's? — #40
I know all this overclocking is nice, but I don't want to ruin my warranty, and I don't want to ruin my motherboard. I find there are also cost efficient ways to increase your sp…
Overclocking G3's? — #41
Other alternatives are great...but the benefits aren't as much as you make them out to be. Having virtual memory on isn't as much of a slow down as it used to be in the past. (sys…
Overclocking G3's? — #42
eeeh, Intel Pentium III's are extremely hard to overclock, why is Intel doing this, I dunno, but they did. Sure, Celeron's are better to OC, but Intel is clearly trying to make ove…
G3 6100 and Linux — #1
Hello, I have a Sonnet G3 upgrade in my 6100.
Without this card, MkLinux works. However, this card doesn't support MKLinux. I have asked Sonnet many times about this, and I always …
G3 6100 and Linux — #2
The problem is the NuBus slot in your 6100. I have a NEWER 210 G3 in mine and face the same problem. There are not many NuBus machines out there, comparatively speaking. In the …
G3 6100 and Linux — #3
I too have the NEWERtech 210 G3 upgrade in my 6116 PPC Performa. It's been a real system saver - until I boot into Linux. I read somewhere that you could change the type/creator of…
G3 6100 and Linux — #4
Try: http://www.erf.net/~brd/mac/6100faq.html#linuxg3
It doesn't say how it works or an e-mail address for the postee but the guy who runs the website might know.
G3 6100 and Linux — #5
I *THINK* you need to install Linux WITH the card in the slot and WITH it active. If you install Linux with the card inactive, and then activate the card, it might screw up the har…
G3 6100 and Linux — #6
Newer G3 cards on Nubus Computers are working
with Mklinux
(I ' m using a 7100/80/Av + Newer g3/240
Sonnet's don't ...
It would be a good idea to subscribe to mklinux-setup Mailing…
No preview with Epson Stylus 600 — #1
On the Epson Stylus 600 you cannot preview your document before you print. On the Epson 740 you can. Is there a driver upgrade for the 600 that will let you preview before you prin…
USB PCI Card Trouble?? — #1
i recently put a pci usb card in my performa 6500 and am using apple developer usb drivers (1.2f2) in my computer. i purchased a macally usb keyboard and i cannot turn on my comp…
Overclocking a 6500 — #1
Is this possile? There are no G3 upgrade cards avalible for my 6500, so i want to overclock it. Im not afraid of heat problems of any sort...Please Help!