It's driver is on the hard disk. It's .Sony

There is no extension for the floppy drive. Its driver is built-into the ROM of the Mac, and may also be inside the system file somewhere. The CD-ROM has an extension. Neither l…

i have ran into these issues before, sometimes the driver extension can get messed up, sometimes it can be the eject system getting gummed up, or a bad cable connection. i think i…

I had been planning on putting a fresh copy of an OS on there, and I ended up putting 8.5 on my G3. Ejecting floppies doesn't appear to be a problem any more. I really wonder if …

I would never have thought of that. Is there some specific reason behind that suggestion, Bunsen? Are you suggesting to rebuild the desktop on the HD or the floppy, or both?

Try rebuilding your desktop.

I would first just remove the drive and clean all the dust out of it. Then insert a disk into the bare drive and manually eject it a few times to try to observe any problems. Cou…

I've been tinkering with my beige G3 running 9.2.2 as of late and discovered it is having some issues with its floppy drive. Specifically, whenever I eject a floppy, it spits it o…

The discs you are using, are they CD-Rs? Or is it a DVD-R? The early iMacs and iBooks have issues with burned discs. It seems they were an early implementation of a new laser, …

Oops, just seeing I posted in the wrong forum. Sorry about that! May some moderator move the topic?

I'm in the same boat with mine, but I don't have an optical drive to boot from, or the Firewire model.

Hi all! I have a dead blue Clamshell iBook lying around that I'd like to rescue. When turned on, it chimes, and shows the question mark. Nothing wrong until now: it won't boot fro…

^^ Rev 1 or 2 The best way to make sure you're getting a Rev. 2 motherboard is the "402" marking on the CMD646 IDE controller chip Click to expand... Franklinstein's rig…

how do i check what revision this is?

Do you have one of the Rev. 1 B&W? Those are reported to have many problems, though most pertain to the UDMA implementation on the primary IDE channel. My Rev. 1 B&…

With my Beige or B&W before installing CPU Director, they ran at a default speed of about 500mhz (I'm not at home so I can't check the exact number) no matter what the jump…

it is a powerforce that you adjust the speed using cpu director. the jumper settings arent supposed to matter. This leads me to think that it is an open firmware problem. I tried…

Is it one of the cards with a dial for speeds rather than a jumper block? If you search for powerforce here you will find a relevant thread.

I have a powerlogix powerforce g3 and my computer wont boot with it installed. It still boots with the orignal processor. The powerlogix was previously installed into a beige g3 …

i dont think it can be enabled for both PCI and AGP cards, i think it has to be one or the other.

Interesting stuff. I've never thought of booting from CardBus. I usually don't leave a card in when I power down (too many machines, too few peripherals), and if I need to boot fro…

Hey guys, can someone help me enable Quartz Extreme on my PCI Radeon 7000 WHILE still being able to use my AGP card? I need to use both because this quicksilver I have is needed fo…

I knew I had seen something more about this somewhere, so went digging.... The 3400c is very like the 2400c, and for our purposes the key thing is that its cardbus capability is s…

If the machine is cardbus enabled, will this theoretically improve the drive's speed? If the machine is cardbus enabled, will this theoretically improve the drive's speed? Click…

my guess would be only if the adapter ur using is cardbus and not pcmcia