I spent a good hour just flushing the whole system so I'm preetty sure anything that was in there is not there anymore.
Anyways, I was poking around and I found a part number for …
68kMLATroubleshootingby CelGenSat, 12 Dec 2009 - 03:05
After reading this entire thread, I would like to second Porter's excellent question that would put an end to all the speculation:
What component smoked?
I know the starter of th…
68kMLATroubleshootingby JDWSat, 12 Dec 2009 - 00:47
I'm fairly certain that "whoop-whoop-whoop" and "flup-flup-flup" or "whup-whup-whup" are all best efforts at describing the same thing: Power supply in self-protect mode. A current…
68kMLATroubleshootingby tomlee59Fri, 11 Dec 2009 - 23:43
auto coolant (mixed properly) should not effect aluminum, since a lot of cars use aluminum radiators in them
just make sure you get all that gunk out, some of it looks crystalline…
68kMLATroubleshootingby OsgeldFri, 11 Dec 2009 - 22:09
That looks bloody awful! I'd check out your Yellow pages for an o-ring distributor (usually found in an industrial part of town); you could also consider using gasket silicone but…
68kMLATroubleshootingby ByrdFri, 11 Dec 2009 - 22:04
depends on the differences of mine and your interpretation of whoop-whoop-whoop sound. Drive model JU-268A026C is what i used.
Click to expand...
If you can record the sound it…
68kMLATroubleshootingby Mac128Fri, 11 Dec 2009 - 20:23
I have two complete Liquid Cooling Units (with two 2.5ghz processor boards each) and both have unfortunately leaked. I can confirm at least one set of processors work (the other wo…
68kMLATroubleshootingby CelGenFri, 11 Dec 2009 - 18:52
smoke from analog board, and then chirp-chirp-chirp from the analog board.
Click to expand...
Pina suggests checking the resistance across CR5. Anything higher than 3.6K Ohm ma…
68kMLATroubleshootingby techknightFri, 11 Dec 2009 - 18:52
Disk Drive is a no Go, as well as the hard drive it wont mount, I am taking the hard drive out and puting it in my g4 power mac and going to test it, them and going to toss the dvd…
68kMLATroubleshootingby MycatisbigfootFri, 11 Dec 2009 - 04:24
smoke from analog board, and then chirp-chirp-chirp from the analog board.
Click to expand...
Pina suggests checking the resistance across CR5. Anything higher than 3.6K Ohm ma…
68kMLATroubleshootingby Mac128Fri, 11 Dec 2009 - 03:33
its not ram, as i looked on apples site and 3 dings are ram 4 is a rom, problem so i am thinking a bad frimware upgrade happend, so what I did was swap out the disk drive and the M…
68kMLATroubleshootingby MycatisbigfootFri, 11 Dec 2009 - 03:14
The problem with the unit, is the 400k drive rejects the disk, sometimes with a happy mac, sometimes without happy mac, rejecting disk, sometimes with an 0FXXXX sadmac code, someti…
68kMLATroubleshootingby techknightFri, 11 Dec 2009 - 01:38
I can confirm that auto-inject SuperDrives work fine on pre-SuperDrive Macs, having used an auto-inject SuperDrive on my 128k (with 512k of RAM and 512ke/Plus ROMs fitted). However…
68kMLATroubleshootingby LCGuyFri, 11 Dec 2009 - 00:06
Maybe he did, maybe he didn't. Most likely, if the machine was new and it had that draw on it when it was first built, I doubt it would have given up the ghost. I am betting the …
68kMLATroubleshootingby coiusThu, 10 Dec 2009 - 23:49
well I need it know,
It gave me the 4 beeps, (not bongs) but beeps, I looked at apples site and it says its somthing to do with a rom, Umm I thought there was no game system in th…
68kMLATroubleshootingby MycatisbigfootThu, 10 Dec 2009 - 23:03
Why it done this, no idea, but i figured i would try it out since the 400k drive thats in there, isnt in too good of shape.
Click to expand...
It had nothing to do with the Sup…
68kMLATroubleshootingby Mac128Thu, 10 Dec 2009 - 21:45
Scored my third Imac that is a bondi blue,
I am geting the computer in an hour as its in my neighbours trunk, (I asked if she could bring it over) She works at my school and is dr…
68kMLATroubleshootingby MycatisbigfootThu, 10 Dec 2009 - 21:18