Are Lombard batteries anything like Wallstreet ones? On a Wallstreet the lights on the battery are on when it is charging and when fully charged they go out. You could have issues…

No need to stick anything inside the drive in most cases. Just hold the mouse/trackpad button down and then start 'er up. Keep it held down until it spits it out (takes some time, …

Tweezers? Try taking the disk out with a pair of them.

...or just hold the trackpad button down -- an external mouse isn't a requirement, AFAIK. The trackpad button method has saved my bacon many a time.

Try plugging in a mouse and holding the button through startup, this is Apples force eject protocol for these drives.

A little patience and this was the solution :b&w: Newton now back in action. Thank you all very much. Michael Remove the battery and power for a little while, the…

most of the times you can just press the reset button and it will spring back to life. my MP2100 did that a few times. the first time i wigged out cause i just bought it. i remembe…

Remove the battery and power for a little while, then attach the power cable only. Slide and hold the power button over, and a very dim screen should come up asking if you want to …

I've never had this with mine but I'd suggest signing up here: http://www.newtontalk.net/ If one of these guys can't help then I'd be surprised.

Make sure it is not less than 75%. Go for 90% to 99%. Make sure the percentage is listed on the bottle because they will try to sell ya the weak crap if they can. The higher the …

Thank you all for your suggestions. I have removed and reseated the ROM card to no avail. I hadn't thought of the alcohol. I will give that a shot. Is anyone here good with a mult…

A good spraying of freon could be helpful in removing any remaining tomato residue and all the dried up conductive minerals left behind from the water and possible residual toothpa…

It might be worth while paying some attention to the ROM card under the rear cover. Is it seated properly?

A good spraying of freon could be helpful in removing any remaining tomato residue and all the dried up conductive minerals left behind from the water and possible residual toothpa…

make sure it has an internal 6 pin FireWire port, then you know it is a Sawtooth. Oh, and the GBE models have a tall rough silver coloured heatsink on a chip behind the ethernet po…

Thanks ealex79, I just replied to your PM. We are referring to a hybrid system folder that was constructed using Mac OS 8.6 off an iMac restore CD and ROM 2.5.1. I'm certain that…

What I meant by cleaning the whole board was that I used a soft toothbrush with a little water. I did let it dry completely and even used a hair dryer on the low setting to make su…

I think perhaps we need more detail on what you mean by "cleaned the whole board"

Did you get my PM? Did the stuff I sent you work/helped?

Mike, I have completely dismantled a G3 AIO before. It took me a couple of hours, and is kind of a pain, but it can be done. The nice part is the analog board slides out after yo…

If anyone needs ROM 2.5.1 or an ISO image for an entire G4 system restore CD with Mac OS 8.6, please PM me and I will be happy to provide you with the links. The ISO is about 380M…

Congrats on fixing it, Mike! Capacitors commit suicide more often than do resistors, so you likely have truly fixed the problem, and can look forward to it working for a good long …

For a long time Apple would replace or repair those failed B&W CRTs. A 2-3 years back a friend of mine called about it, as he had read something on Apple Discussions or in …

PM sent. Let it charge at least 4 hours. It still could have a capacity and internal drop problem, but a full charge will give it the best chance of running the machine. My unde…

But before that, it would not hurt to leave it plugged in even if not properly recognized and see if it gets any gradual charging over several days time-perhaps the gas gauge is ju…