Skip to main content
Search titles, bodies, and author names
Found 18,074 posts across 1 forum.

DVD Sound — #2

hi, well its good to see more of us islanders using more macs (pismo 500 and very HAPPY). I just noticed that the other day sound out was kind of soft also.so if i find a soluti…
MacNN Troubleshooting

DVD Sound — #3

The headphone amp on the powerbook is not very powerful. Your best bet is to get some decent in-ear headphones. Check the impedence on them. The lower the better. Also, if you …
MacNN Troubleshooting

DVD Sound — #4

one word: Fostex okay, more than one word... Fostex h'phones do not have a mini-plug and you'd have to use an adapter (phonoplug to miniplug) but hey those Fostex can kill, i used…
MacNN Troubleshooting

DVD Sound — #5

I don't understand this. My Wallstreet II blasts my ears off at any volume higher than 1 if I'm using earphones, and I'd really be happier with a volume setting of 0.5 if I could …
MacNN Troubleshooting

DVD Sound — #6

If you look in the sound control panel, under OS9 you have Output, which controls the general output volume, and you have a speaker setup, where you can adjust balance, volume, etc…
MacNN Troubleshooting

DVD Sound — #7

The thing about DVDs is that, so that loud sounds come out LOUD, regular sound is recorded onto the disc at fairly low levels. Another thing you may want to try is active (i.e. b…
MacNN Troubleshooting by tooki

Brand new Pimso DVD drive vibrates?! — #2

some cd's/dvd's tend to rattle a bit... like my MacOS 9 CD will make my CD drive vibrate badly, but it works... it is usually due to some slight imbalance of the media, the label …
MacNN Troubleshooting

Brand new Pimso DVD drive vibrates?! — #3

the drive performs fine, but the rattling/vibrating noise is kind of obnoxious. i only have one dvd, so i can't test it with another dvd. i tested it with multiple cds, and that s…
MacNN Troubleshooting

Brand new Pimso DVD drive vibrates?! — #5

>>yes it is likely the media or i would not have said so sorry about that; i didn't mean to insinuate anything. i just re-read the post, and it came across poorly. i…
MacNN Troubleshooting

Brand new Pimso DVD drive vibrates?! — #6

Yes, and it is a problem I have experienced with every drive I have used that is faster than 8x. Lon is right on the mark that some discs are not properly balanced, or improperly m…
MacNN Troubleshooting by tooki

Brand new Pimso DVD drive vibrates?! — #7

Quote: Originally posted by tooki: Yes, and it is a problem I have experienced with every drive I have used that is faster than 8x. Lon is right on the mark that some di…
MacNN Troubleshooting

Brand new Pimso DVD drive vibrates?! — #8

well, since my initial post, i have had the opportunity to test it with a variety of dvd's, cdr's, and commercial cd's. the vibration problem that i intially noted only occurs with…
MacNN Troubleshooting

Brand new Pimso DVD drive vibrates?! — #9

i to had the funky play back,but after i gave dvd player more memory(30 meg) it plays like a dream...lifes great with my powerbook(500) except for the little problems(wiggly keyboa…
MacNN Troubleshooting

The only problem with my Pismo (modem sound) — #2

I remember this problem from a while back. It's a Mac OS 9 issue. On the control strip, check the sound-in module. This should look like a microphone and a faded CD beneath it. Ch…
MacNN Troubleshooting

The only problem with my Pismo (modem sound) — #4

Some people like that sound, I suppose. I like it because I can tell what protocol the connection is using. Sometimes, I will cancel the connection if the line isn't giving me the…
MacNN Troubleshooting

S-Video out Question... — #2

If memory serves me correctly, you can't run your lines to your TV via a VCR. They must run directly to the TV. If yours is the new Pismo it should come with an S-Video to RCA conn…
MacNN Troubleshooting

S-Video out Question... — #3

also dont forget mini plug to rca connection so you can get audio out to home entertainment system.well hope that helps. http://forums.macnn.com/cgi-bin/smile.gif
MacNN Troubleshooting

S-Video out Question... — #4

I run the audio from the headphone port on my Pismo directly to my VCR, because I have an older TV with no direct video or audio in (there's only the RF in) Unfortunately, I get th…
MacNN Troubleshooting

S-Video out Question... — #5

I think I've posted something like this on another topic, "Can't watch DVD on a TV" I think, but here goes anyway. As far as I am aware S-video only uses 4 pins: 1 - Ground (LUM.)…
MacNN Troubleshooting

S-Video out Question... — #6

Well I have watched many DVDs with my Pismo connected through my VCR, absolutely no problems at all. The composite/SVHS output of the Pismo does not include audio, so you have to …
MacNN Troubleshooting by tooki

Dead/Stuck pixel or not ? — #2

Some pixels are dark pixels and some are light pixels. Souds like you have a broken dark pixel.. Same thing on my last Powerbook... You can't massage a dead dark pixel back to lif…
MacNN Troubleshooting by mrfoxxman
mp.ls