3-D printing with ABS filament is very cool, but does it come in the right color? Is resolution high enough to re-create the subtly texturing of the SE's Case? If I can find my mu…

The bridge rectifier is probably ok. Did you test it with the diode check on the DMM? If its ok then its safe to throw it back in, throw the filter caps back in and another fuse. I…

Unfortunately it's ultrasonically welded so I can't open it without destroying the case. My assumption is you will find the AAUI-AUI conversion is completely passsive, along with a…

yeah i always had good luck with 1.7 gig partitions.  seemed to get issues when i went over that.   

olePigeon said: How about Lido? Click to expand... I will start looking olePigeon... Thanks for the tip. jack

They have 3D printers at the school I work at. It's pretty cheap to print. For example, I printed a case for my iPhone, it cost $0.55. I'm not sure if there is a 3D scanner there,…

parts ordered

Thanks very much - I used Lido to format it in the first place, but my partitions are 2gb, I'll backup, initialise and then make smaller partitions and try again.

unity - been looking at the 614-0039   model and  614-0060 - cant see any difference....still don't know what to do - techknight - thanks for the info - appreciate it - but as us…

NJRoadfan said: Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, b…

How about Lido?

I don't know if they ever made one specifically, but there were adapters out there.  I think our own member bbraun has/makes an adapter to connect ADB to pre-ADB Macs.

Hi Folks.... Can anyone tell me the CFM and the dBA of the *original* Color Classic fan? The original fan is 80 mm X 80 mm by 25 mm.  I believe the fan housing can take at least …

Yeah, make sure your partitions are under 2GBs.  That can cause all sorts of weird problems.

Rats!  The patched HDSC Setup bootdisk is too large to fit on a 3.5 inch floppy.  I will keep looking. Thanks everyone jack

i would say hit it with lido7 ,  nuke drive make new partitions, don't exceed 1.7 gb each. re-install 7.5, and you should be fine. here

The next thing I'm going to try is a fresh system install on a different SD card

I should mention also that I've swapped out the PSU and logicboard and it behaves the same (at first I thought it was maybe faulty SCSI controller).

Sherlock isn't in 7.5.5...it's not even 68k compatible.

Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, but called it "Mini AUI…

Are you using Sherlock to speed up file searches? The older version of Sherlock corrupts the file structure, best to find the extension and remove it.

It can update, but not all the dialogs will have the updated UK Spellings. You would end up with a Frankenstein system where the dialog windows will come up with either American or…

The patched HDSC should work. Since it is System 7.5, you need to partition the CF into 2 or more partitions of 2GB or less.

The issue is not the SSD Drive you have but the interface it is on. That is the biggest limiting factor of the system 95% of the time. Next is the OS, as it has to do the task and …

The NuVista was smoking after the pop. I removed what appeared to be a charred component which is what the screwdriver is pointing at. When I get it out again I will try the sugges…