I work in an office with an NT 4.0 network, Novell 5.0 & Unix networks. The NT is a piece of crap. We'd feel lucky if it only crashed once a month! Novell, on the other hand…

Does anybody know what if any length limitations there are in a mac to mac ethernet connection, and where I could find various lenghts of ethernet cable w/ RJ-45 jacks at each end.…

I don't know how far they can go but, to get long lengths, you have to go to your dealer or anyone that can make cables and ask them to make it and how long it can go.

Category 5 Ethernet cable runs can be a maximum of 100 meters without any sort of repeater. Anything longer than that will require a repeater inline. Are you utilizing a hub-to-hub…

I need help as fast as I can get it. I need to figure out how to connect my new BW G3 to my trusty HP 5MP printer. Keyspan USB to serial does not work. Has someone figured it out? …

Farallon makes some LocalTalk to Ethernet connectors. Check their web site.

I sent email to sales@keyspan.com. They answered my question about an adapter for my HP 4 ML by telling me it would be available in April and probably cost $100. Suggest you try th…

My printers all now work. The Epson connects through the Keyspan USB and the HP 5MP goes through Farallon's iPrint ethernet to localtalk. All's well that ends (prints) well.

Correct me if I am wrong, but I thought the B/W G3's had an IRDA (infrared) "port". If so, one should be able to communicate to a LaserJet 5/6 MP printer using the IRDA. It may …

If anybody has purchased Mac version video cards such as Mirro Motion DC30+ or Mirro DV300 by Pynnacle Systems and are frustrated that the company has failed to update drivers for …

The mouse I plugged in wasn't working too well, so I've been using the built-in trackpad & clicker on my Powerbook. Now the clicker only works if I push real hard in middle, an…

ok, I was wondering if anyone knows the real difference between the 300mhz/350mhz/400mhz B/W G3's, as far as the Mhz vs Heat. Could you over-clock a 300mhz B/W G3 to run at 400mh…

Hi, I want to overclock my Rev A. iMac next week too. Is 266MHz the max speed Rev. A can support? Thank You

You can overclock alot higher than 266 but I choose to just goto 266 because I didn't want to deel with heat problems. I've talk to one guy who overclocked to 300 but his iMac wou…

You can clock your B&W G3/300 to 400 MHz with no adverse effects because the 300, 350 and 400 MHz models all use the same motherboard...the only difference is which sets of pin…

I hear everyone talking about overclocking and heat problems. Just what temperature's are considered to be a problem? My G3 card runs at about 130 degrees F. all the time....how mu…

To blizaine: The biggest difference between the models is the 300MHz model only has a 512k Level II Cache. The 350 & 400's have 1MB. You could prob. squeeze 400MHz out of your …

Anyone overclock the G3 upgrade cards. PCI or PDS types. I did but was interested in anyone else who might have. As for heat my G3 card is stuffed in a 6100 with a HPV video car…

What are you usignto give you the inside temperature of your Mac CPU? Is there a software available for this?

To know the temperature of you Mac Procesor you can use the SpeedMeter utility from powerlogix.com ------------------

Anyone knows how fast can i overclock a Gossamer G3/333 minitower, without the risk to have problems with the temperature or damage the procesor or damage something related to the …

Over the weekend I overclocked my B&W G3 from 300 to 350 MHz.....according to SpeedMeter the CPU temperature is running at only 87 degrees. Could I push it to 400? Probably..…

Where can I get the chip clipper? I really want to clock my rev. A iMac

In regards to iMac overclocking. I overclocked my Rev A iMac to 300 MHz and ran it that way for 3 months with no problems. If you are concerned about overheating there are a couple…

Dolfanatic said: "Over the weekend I overclocked my B&W G3 from 300 to 350 MHz.....according to SpeedMeter the CPU temperature is running at only 87 degrees. Could I push it to…