Hello, I have a Sonnet G3 upgrade in my 6100. Without this card, MkLinux works. However, this card doesn't support MKLinux. I have asked Sonnet many times about this, and I always …

The problem is the NuBus slot in your 6100. I have a NEWER 210 G3 in mine and face the same problem. There are not many NuBus machines out there, comparatively speaking. In the …

I too have the NEWERtech 210 G3 upgrade in my 6116 PPC Performa. It's been a real system saver - until I boot into Linux. I read somewhere that you could change the type/creator of…

Try: http://www.erf.net/~brd/mac/6100faq.html#linuxg3 It doesn't say how it works or an e-mail address for the postee but the guy who runs the website might know.

I *THINK* you need to install Linux WITH the card in the slot and WITH it active. If you install Linux with the card inactive, and then activate the card, it might screw up the har…

Newer G3 cards on Nubus Computers are working with Mklinux (I ' m using a 7100/80/Av + Newer g3/240 Sonnet's don't ... It would be a good idea to subscribe to mklinux-setup Mailing…

Does anyone know anything spectacular about any new Mac models? Sam Rosen [This message has been edited by srosen (edited 03-13-99).]

Could you be more specific about "spectacular"? They're Macs! Isn't that spectacular enough for now? By the way, aren't you in some commercial or something? I suddenly crave chick…

Quote: Originally posted by srosen: Does anyone know anything spectacular about any new Mac models? Sam Rosen [This message has been edited by srosen (edited 03-13-99)…

it did in 1999

a desktop with the whole iMac saga would be welcome

Quote: Originally posted by JohnSmith68: this belongs in the lounge you ****ing moron.

On the Epson Stylus 600 you cannot preview your document before you print. On the Epson 740 you can. Is there a driver upgrade for the 600 that will let you preview before you prin…

i recently put a pci usb card in my performa 6500 and am using apple developer usb drivers (1.2f2) in my computer. i purchased a macally usb keyboard and i cannot turn on my comp…

Hello, I wonder is there any place I can buy a 7"NuBus A/V card for my PowerMac 6100/60? Thank you

I have 2 IMACs that both have Apple Remote Access software on them. I need to install one of the machines at a site that has a NT Network running. Using my internet access I want…

First, to connect to an NT network, all you need is a standard base-T cable plugged into the ethernet port of your iMac. For further functionality and interoperability with the NT …

Can anyone tell me how to use my iMac as the monitor on my G3 tower. I have heard it to be done, and need to know how.

Now I have never done this and never heard of it being done but I know that if you take the bottom casing off of the iMac that the monitor cable is there. I guess you can connect …

All this talk about overclocking has me wondering what I can get out of my beige G3/266 Minitower. Anybody tried that?

I too wouldn't wind knowing how to get my Beige G3/300 MT upto 333Mhz if possible. I've seen how to get a 233 faster but never the 300.

Well, subject pretty much says it all. Does anyone have experience with putting a Mac in a new case? I have a 7300 that I'd like to put into a big tower so that I can add more driv…

Hi, you can put the 7300 in any ATX Style case. Apple just used a form factor near ATX. The only thing to do is to make your own I/O shield in the back of the case, because most A…

Does anyone know how to change the duplex setting of the built-in 100BaseT ethernet from the current HALF duplex to FULL duplex without having to get another NIC from another vendo…

Ckeck your hub setings, I run a Macsence switch and I get default full duplexing. If your hub only handles half then the card will sence and switch to a half duplex. -------------…