Speaker Buzz with internal GV modem — #1
I have a B/W PowerMac G3 with a Global Village Internal 56k modem. I notice that whenever I use Remote Access to make a PPP connection with the modem, I get this very annoying spea…
Found 59,537 posts across 1 forum.
Which DVD-ROM drives can read DVD-RAM? — #1
Since Apple have choosen DVD-RAM as their writable DVD storage it would be nice to know which DVD-ROM drives can read such disks.
While searching for this information I got several…
Digital monitors (& FireWire?) — #1
Does it make any sense to expect I'll be able to drive a digital LCD monitor from the Firewire ports on my blue G3? Or do I need to wait for the appearance of ADP slots or ports on…
Digital monitors (& FireWire?) — #2
It will not be possible to connect your Digital Flat panel to a firewire port until the flat panel has hardware to interface with Firewire as well as the software required to decod…
Digital monitors (& FireWire?) — #3
Why wait? <a href="http://www.formac.com/">Formac</a> makes a mac compatable PCI video card which can support both VESA and SGI TFT's. It is called the <a href="ht…
Apple Flat Panel vs. 17" Colorsync- HELP — #1
Can anyone give me an opinion comparing the display quality (color, sharpness) of the Apple 15" Flat Panel Display with the older 17" Colorsync? I now have a 17" Colorsync that I a…
Apple Flat Panel vs. 17" Colorsync- HELP — #2
Whatever you do, dont use any other resolution then the optimal one on LCD's.
Borrow a Powerbook and find out how it looks.
I have a 15" Studio display closeby and the quality is s…
Apple Flat Panel vs. 17" Colorsync- HELP — #3
he's right, The flat panel has similar quality, the color can be a bit off though if you do not calibrate a profile for the display. Don't settle for the Apple Default FPD profile…
Apple Flat Panel vs. 17" Colorsync- HELP — #4
The ability to scale is built into the display, not the MacOS. Otherwise you couldn't use the display on Wintel which you can. The system is called Manta and looks better than any …
Apple Flat Panel vs. 17" Colorsync- HELP — #5
Basically, though, about the Apple FPD vs ColorSync 17":
as mentioned, the ColorSync 17 is not compatible with the G4s.
BUT I personally would not necessarily choose Apple's fla…
Upgrading an old 7500/100 — #1
My old system was a powermac 7500/100 and I was pretty happy with it. It did everything I needed, but then for my high school graduation I got a beige g3 333mhz minitower. Eventual…
Upgrading an old 7500/100 — #2
According to NewerTech you are in bizness:
MAXpowr G3 Carrier Card will launch you into the current day with ZIF technology. ZIF (Zero Insertion Force) sockets are quickly becomin…
Will ultraviolet damage a digital camera? — #1
i doubt it. any time you take a picture outdoors, your camera picks up ultraviolet light. just be sure to wear goggles while using the camera.
-r.
Will ultraviolet damage a digital camera? — #2
I was planning on using my camera to take some pictures of arc welding in action. Of course, the arc emits many ultraviolet rays, which can damage the retinas of people in the room…
Will ultraviolet damage a digital camera? — #3
&lt;-------- this dude is too drunk to be posting
It would probably be the UV requivalent of pointing the camera directly at the sun. And I would probably use the LCD, not the…
Will ultraviolet damage a digital camera? — #4
If your camera permits, try a combo UV /polarizing filter. Anti-glare AND UV protection, Camera shop should help you with that one. Of course, it depends on what kind of camera you…
Will ultraviolet damage a digital camera? — #5
just for the record, a UV filter won't prevent damage to your camera (since UV won't damage your camera), but it will ensure that the image you see isn't skewed because of the UV l…
a mitsumi 4801 cdr in a blue&white; g3 - will it work? — #1
The subject line says it all. Since I already own a burner (which is currently
hooked up to my pc), my blue & white G3
has an EIDE network and I don't want to
buy another bu…
a mitsumi 4801 cdr in a blue&white; g3 - will it work? — #2
I threw my ACER IDE CDR into my blue and white G3 and all hell broke lose. The computer CRAWLED and wouldn't mount anything. Then, I installed Mac OS 9 (fc2) and it worked great.…
Video-Editing System — #1
I would like to edit VHS footage and then be able to export it back to tape. (For some extremely-low-budget film projects of mine I would prefer to be able to do it on my Rev. A …
NEC clik!-usb drive — #1
NEC makes a clik!-usb drive. A friend of mine has one and he uses the IomegaWare software for Windows98 to access it.
"USB Iomega Driver" software for Macintosh does not support …
NEC clik!-usb drive — #2
NEC clik!-usb now works.
I installed the USB Mass Storage Support 1.3.5 from Apple, and now I have a USB clik! drive for the Macintosh.
Cons - DOS formated disk, unable to reform…
NEC clik!-usb drive — #3
To format a DOS disk as HFS or HFS+, disable File Exchange or PC Exchange (depending on what OS version).
Then when you mount the disk it will pop up with the "This disk in not in…
Powerbook wallstreet DVD video Kit — #1
I want buy the PowerBook DVD video
Kit ( COD: M7164LL/A) but I can't find it.
I try to Aple Store, but I can't find it
Samebody can tell me where can I find it?
Thank you very muc…
SCSI to Ethernet — #1
I need to setup my 6100 as a IP router and a server. I don't want to remove my G3 upgrade, so I am looking for devise that puts a ethernet port on my SCSI chain. I remember them be…