Hard Drive Screws — #3
I would email the company that made that there drive.
And if that was a Simpon's reference, Cletus is the slack jawed yokel. Barney Gumble is just a drunk, that burps, not hiccups…
Found 62,121 posts across 1 forum.
Hard Drive Screws — #4
And isn't it "Duct" Tape??
Hard Drive Screws — #5
The screws for most drives I have installed are 6-32 UNC, with a maximum length of 1/4 inch.
If you are using the side mounting holes then on some drives the screw can foul the ci…
Hard Drive Screws — #6
The screws for most drives I have installed are 6-32 UNC, with a maximum length of 1/4 inch.
If you are using the side mounting holes then on some drives the screw can foul the ci…
Silver Powerbook - Help! — #1
(Posted this in the Powerbook forum also, sorry for the redundancy)
Hey all, I'm looking for some kind soul to provide me with DETAILED instructions (in english) on how to do the …
Silver Powerbook - Help! — #2
Blah.
Go to your local sign maker. Ask for some 3M ScotchCal in silver. It should have an adhesive side. Bring it home. Cut it in half. Line up one half over the outer section of …
G3 Won't Overclock — #1
I have a rev1 B&W G3/300 mhz. I broke my warranty (was up anyhoo) and tried to overclock it today. I followed instructions from xlr8yourmac.com and well, no results. I tried EV…
G3 Won't Overclock — #2
Is there no setting for anything lower than 350mhz and higher than 300mhz? Try that... As for the processor itself, some processors have good yields while others do not. For exampl…
G3 Won't Overclock — #3
I don't think their are any settings for jumps inbetween 300 and 350. That and the increase in speed would be almost unnoticeable.
I was going to try playing with the bus speeds a…
OVerclocking G4 how?? — #1
Okay .. so I am newbie to this overclocking business .. I have done it on a PC before .. but never on a mac.
I have 2 G4's one 400mhz Yikes motherboard
And one 400mhz Sawtooth mo…
OVerclocking G4 how?? — #2
G4 strip allows for speeding up the L2 cache from about 199 mhz to 265.7 mhz. A noticeable improvement. Actual speedups regarding the CPU on Sawtooth - unknown. As far as Yikes?…
PC with a G4 daughtercard — #1
Having seen that Powerlogix designed a whole iMac system board from scratch, another possiblity just came to my mind...
Would it be possible that Powerlogix invented a G4 add-on c…
PC with a G4 daughtercard — #2
Well, using the AGP slot means you would have to use a PCI graphics card. Also, it would be better if Orange Micro just came out with an Athlon card for G4s.
PC with a G4 daughtercard — #3
Orange Micro makes K6-2/600 daughtercards and sells them for $1000. What would an Athlon cost?
Plus, the G4 does not have enough puff in its power supply to feed the monstruous At…
Add a Mez slot to a REV D Imac — #1
Please disregard this post I found all of the previous banter on this subject and am now informed.
Although if anyone has a visual quick start guide to this hack I'd be indebted to…
modem bonding — #1
I was wondering if anyone has ever experimented with modem bonding on the Mac since I know it can be done on PCs. I have a network of about 5 macs at home and figured, if a network…
Overclocking — #1
I want to overclock my powermac 5400/180 to 200 MHz and if that is stable maybe more. I'll add a fan to keep it cool. How do I go about this. Is there a way to increase my 40mhz bu…
Overclocking — #2
The only way I know of to OC your bus is to actually go in and remove resistors. This is very touchy because if you get it going too fast, your system will freeze or crash. If th…
Overclocking — #3
Beige G3 is jumpered, not using regular resistors, making it easy to OC, and almost everyone did such...on the other hand, the iMacs and the G4s are much harder to OC.
Prior to th…
Overclocking — #4
Go to: http://www.bekkoame.ne.jp/~t-imai/pm54e1.html
This shows you what resisters need to be moved and where to put them!
Mr. Corwin
ATA/66 in beige G3? — #1
Whoops! I accidentally posted this twice! Please delete this one!
[This message has been edited by bojangles (edited 08-30-2000).]
iMac Gamewizard question — #1
I just got a rev B motherboard in my iMac rev D and installed the GameWizard. Now my monitor switches off in OpenGL games (light turns orange)! What am I doing wrong? It doesn't do…
iMac Gamewizard question — #2
You're either trying to use 32 bit color or too high a resolution. The voodoo2 is VERY limited in what it can do. Keep it at 640X480.... its a good resolution for such a tiny …
iMac Gamewizard question — #3
Got it to work at 640x480 now. But now the screen is stretched very strangely. How do I fix this?
iMac Gamewizard question — #4
hello, i currently own a igamewizard, and i cant find the CD for it. I have searched the net far and wide for copies of the
QD3d and glide drivers but n…