ok i am just plain stupid. explain to me again how 100MHz is 50 percentum more than 66MHz now if you mean it is 50% faster... well... good lord, i pay no attention to such trivi…

If I may: 33/66 = 1/2 so 33/66 = 50/100 so 100 is about 50% MORE than 66, since it is 34 more than 66. BUT, 66 is about 33% LESS than 100. It depends on your viewing angle... I we…

I am not sure of this, but the product of bus width (in bytes per cycle) and the frequency (in Hz) should be equal to the bandwidth. So: 64 bit bus = 8 byte bus 8 byte * 66MHz = …

yes, it is 66.66 mhz. And the 100mhz buses are actually 99.99mhz. But who cares!? The real question is, can we change the bus speed in our 1st gen iMacs. Ca$h

actually, in theory, it's 66.666.....repeat indefinitely, while 100Mhz buses should be exactly 100Mhz. Don't ask me why they use 100/3 multiples 'cuz I have no clue... and you can…

Does the bus OC have to be done with soldering or is there some sort of utility that can solve the problem for you, perhaps something similar to the Powerlogix backside cache utili…

I have PC-100 SODIMMs in my iMac Rev D (now rev B ). Could that explain the frequent freezes which only appeared after I installed the RAM? Is it possible the bus can't catch up …

Timmy, as far as I'm aware of, to OC the iMac mobo, you'll have to do it through hardware, and it's not just simple jumpers either...I haven't read anything on it from Xlr8yourmac,…

PC100 SDRAM has a clock speed of 125 mhz in order to insure that the bus isn't waiting it has to be faster, and a speed of 6-8 ns. The G4 uses Maxbus as I understand which takes …

I own a Sawtooth G4 350. I was wondering what the chances are that it is really a underclocked 400. I know that Apple moved their G4 line down 50 MHz because of a lack of 500 MHz p…

No, 350s were actually manufactured by Motorola intentionally.

I just finnished overclocking my sawtooth 350 to 450. It runs fine and is a revision 2.6 cpu.

Is it possible to overclock a Sonnet Crescendo G3, a Nubus Upgrade for the x100 PowerMacintosh Series, and if so, how do you do it? ------------------ People aren't as dumb as you…

I e-mailed some of the G3 upgrade companies sites to find out whether they use copper chips or not in certain models so you can overclock them better. Part 2 is to get some closeup…

I just had a great idea. Outline my G4 with fiberoptic cable. (the kind that they use for pool lighting, it shoes color the whole length) Has anyone done this? Does any one know wh…

I work for a pool company and can get all I want wholesale... I don't think it would show through from the inside of the G4 case though. It would probably be better suited to an i…

How thick is it? Could you put it on the out side? The handles have grooves that could fit pretty thick stuff. How much does it cost?

DAMMIT! END THIS CONVERSATION NOW! ARGH! GO AWAY! IT WONT WORK AT ALL! THE CABLE IS ACTUALLY FLASHING LIKE A FLOURESCENT BULB< AND IT MAKES YOUR COMPTUER SCREWY! DO NO…

Maybe you got cheesy cable cash, it's not supposed to flash. And how did it make your computer screwy? Was this your secret hack? ------------------ -Ruddigger ------------------ …

It flashes, thats why it needs a small transformer... it WILL NOT WORK! Ca$h

I have an old LC 475, but i want to upgrade it to make it so it actually is more usable, i know most of you would say it is a waste of time, but i still want to fix it up, so what …

Someone OC'd an LC 475 to over 125MHz... using a water cooling system.

Holy $hit! Now exactly how much would this water cooling system cost? ------------------ People aren't as dumb as you think. Wait, what was I thinking, 90% of the world uses W…

Just bringing up this old topic again. Does anyone know if the motherboard in the LC 475 can be replaced with a better one? ------------------ People aren't as dumb as you think.…

an lc 475 is the top of the line for that case design. i think it's the same as a quadra 605. even if it wasn't, the performance couldn't be that different. dabradda