Bunsen...Have you taken your pills? Click to expand... No, I ran out. Can I have some of yours? Click to expand... Sure you need some vicodin?

It should say on the fan I would expect it to be 12V dc thanx for the comments michael

It can be replaced, but you will have to open the power supply to do it, obiously you should have it unplugged, but there's some hefty filter capacitors on the AC side that can pac…

The fan on my quicksilver 2002 power supply is making a lot of noise ie all most dead. can it be replaced or is another ps in order? thanx

cant say for 68k but would doubt it - the version being used for the WWU is a universal binary so you are in if you have a PPC Mac thats good enough.check out the doom-retrochallen…

Running it through an empty dishwasher with no soap and clean water makes a fabulous job of it, as it happens, but most likely the same magic could be worked by sticking the thing …

Gotcha,thanks. Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasi…

Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasis. Because the 575 motherboar…

Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasis. Because the 575 motherboar…

i don't have a laptop but i can tell you that if you are only going to do text editing or things like that, on my 450mhz G4 desktop OS 9 is very fast for things like that.....also …

. Here's the review, and here's the manufacturer's page (archive) Note that they claimed that only their own "modified" G4 ZIFs would work properly. I see XLR8 also recommended …

6500 board in a 5200 or 5300 chassis / 3.3v regulator hack Click to expand... I was able to pop a 5500 board into a 6200 Click to expand... Huh. I actually thought …

I am now the owner of a 1GHz TiBook. What I'm curious about is, it has a 1GHz G4 and can boot into OS9 (pretty nifty), although I hadn't played much around in OS9 (just got it and…

What if you made it so that your signature had just three lines. Code: Line 1: a system or gadget that you want to feature that week. your newest, one you've been using a l…

I'm happy with my B&W G3 with maxed out RAM (1 GB), upgraded 1.1 GHz processor (well, it's advertised as 1 GHz but the setting goes to 11, er, I mean 1.1), and OS 9.2.2. I'…

There is an exception. The hack *MUST* be done for the 5400 board. However, the 5500 board will work *WITHOUT* the hack, but there might be issues with PCI. I'm not sure if this is…

Bunsen is correct - in order to use the 6500 board in a 5200 or 5300 chassis, you must do the 3.3v regulator hack mentioned by johnklos.

The fastest current PPC system I have is only a B&W with a G4-450 CPU upgrade (needed for a Matrox RTMAC setup I have). Click to expand... When current, Matrox stated, …

chesty i will miss you so!

" - " takes up 3 characters that could be used for other stuff. Click to expand... So drop the redundant cruft: Nicknames (because no-one cares) "Summer 2000" (doesn't tell u…

Is there any all-in-one Macs that a 6500 motherboard will plug into? Click to expand... the 5xxx series AFAIK. Click to expand... Without mods, only the 5400 and 5500 from …

An overclocked 1.42 GHz Mirrored drive door will probably be faster than a 7447a because the Apple processor has 2 megs of L3 cache in addition to 256k of L2 cache as compared with…

Don't see why that should be a problem - The VGA output looks pretty standard, and 67HZ is about as basic and common a sync rate as you can find. But if for any reason it is an is…

I should have added that not all 8139 cards work; only certain revisions (which I can't recall sorry) JB

I looked a little for that upgrade. I couldn't find it. Anyone want to point me toward it. I have heard rumor of it for a while. I remember doing a bit more research on it a long t…