That should do it. What a neat little device...just a shame it needs Zoomed video to work. (which means that it won't work with my PowerBook 1400 )

There is no magic bullet but persistence, and even that will fail if the PB is unserviceable. Check the AC adapter, for output voltage and temperature, after 5min and 1hr. Is it …

http://www.kernelthread.com/mac/osx/arch_boot.html It's in the reg section. My iBook has two 512MB modules and so has 00000000 20000000 20000000 20000000 Yours would appear to …

Anybody.

I did the following command: dev /memory@0 .properties and it came up with the following: Code: name memory device_type memory reg 00000000 00000000 …

Installed new pram battery as I say on another thread, and these replacement cells seem to work fine, though to be honest, not having a multimeter, I haven't tested the charge prop…

It is possibly, I can't remember off-hand, but it probably involves finding the path to the RAM and getting .properties. Try doing > dev / ls to see a list of devices, and…

I will be bidding on this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330283948578&ssPageName=STRK:MEWA:IT&ih=014 in the hopes that it…

I'm not sure, but wouldn't it be easier to boot the machine up and go to About This Mac?

With New World Macs I get, I'd like to be able to find the RAM amount quickly and easily, so is there an Open Firmware command to get the total amount of RAM?

When I powered down for the final time, the battery still had well over 30% charge and it was no more than an hour later when I attempted and failed to boot it up again. I reset t…

There are quite a few possibilities. Just for one, the battery was barely-charged, and the presence of the CD-ROM drive (which is constantly polled by the system 'in case' there i…

I picked up a 3400 on eBay a week or two ago. It was sold w/o an ac adapter but w/ a charged battery. When it arrived, I played with it a bit, booting it up on two occasions. Aft…

I am 99.99% certain these hacks will only work on a 233Mhz Rev A board. Click to expand... Make that 100% on the floppy drive. Maybe there are further hacks that can be done t…

Yes, I also emailed the company and they said they don't know about Macs, but it needs a capture card of some kind. So now I'm going to have to look for a capture device.

That S-Video port on the back of the Lombard only does output, not input. You'll need either a PCMCIA or USB video capture solution of some sort.

Which reminds me..one of these days I've gotta find a Rev. A iMac somewhere...would be a neat machine to play around with, not to mention that if I keep it original and in good nic…

Just got (for husband's peace of mind) a set of 2 security cameras that wirelessly connect to a receiver, which connects to TV/VCR/etc with an AV cable that has one red and one yel…

I'm about to put down $21 for this item: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230304040895 Click to expand... So buy it already! [] ]'>

I am 99.99% certain these hacks will only work on a 233Mhz Rev A board.

Hello everyone, I have a PowerBook G3 Wallstreet with 9.2 installed. 233MHz model with 256MB of RAM. The machine runs fine with OS 9, but I decided I'd install Mac OS X. I read th…

From what I gather, 8.6 is the minimum that will run on this iMac, and you say it would need less than 8.6. Does that mean there's no way to get this to work?

My B&W gave me fits until I did a firmware update on it. I went from 8.6 to 9.2 to 10.4 http://discussions.apple.com/thread.jspa?messageID=3841731 The Revision 1 B&a…

Depends on the price really, I love mine and I've managed to pimp it hugely so I'd say yes.

^^digging around it looks like the floppy port will only run on systems below 8.6, if the iMac has had the firmware update applied for OS X then that too could be a factor.