Do you have access to an old G3/Sawtooth that you could stick the drive in, install System 8 and then stick the drive back in the Quicksilver?

Are you sure MacOnMac is not an emulator. It says it is on it's own site. http://maconmac.bastix.net By the way the site is down. I used the Internet Wayback Machine to view it. ht…

You can try MacOnMac or MOL on Linux, but it will not run nativly. Click to expand... On the other hand ... MacOnMac and MacOnLinux are not emulators. In the same way that WI…

haha thanks! It is a minitower. Also I should note that I have a firewire USB tango card in it as well as an Acard 6280M ATA 133 controller in it. Reason for such upgrades is my…

My beige config is in the signature. Are there any ways to get the freaking dvd player to work on this thing?!?!?!?! I did a mod/hack where you delete the install check file in t…

On the other hand, what is it with beige motherboards dying? I replaced the one in mine twice over the years. Both times the symptoms were a non-booting OS X install, OS 9 bootin…

No problem! It was even difficult for me to install 8.6 on my Sawtooth G4. People here helped to make it happen. [] ]'>

OK. Thanks for clearing this up for me.

No, only on Jikes and Sawtooth G4's.

Thanks for the quick reply. I know some early G4s shipped with what they call a Borg 8.6.1 disc. I guess this was basically a disc that only came with certain iMac G3 and the first…

It is just impossible. It's missing drivers and makes wrong assumptions on the hardware. You can try MacOnMac or MOL on Linux, but it will not run nativly.

Hi, I'm new here. I've been looking everywhere on how to be able to do this. I want to be able to run OS 8 on my PPC G4 QuickSilver 2002. I stumbled upon this article, just now, wr…

My beige config is in the signature. Are there any ways to get the freaking dvd player to work on this thing?!?!?!?! I did a mod/hack where you delete the install check file in t…

If you really just want to own a G3 iMac, and particularly if it's one of the more collectable color variations, like "Flower Power" or "Blue Dalmation", sure, go ahead. Try not to…

My recent switch from three 500MHz/1GB iMacs running Jaguar, Panther and Tiger to a single G4 DA (quickly upgraded from 466 to 533 to 733MHz) was to be able to drive a 20-in ADC di…

Say what? I distinctly recall MacAddict doing an article on various machine upgrades. They upgraded on and painted it to look like a marshall amp. Click to expand... That was …

You can test the Lombard internal fan by itself. Disconnect it and make a drawing of the three wire colors and where they go into the plug housing. Then if necessary remove the c…

Perhaps you can find a 5V point somewhere and connect the internal fan directly to that. Maybe on the USB port. It won't be temperature controlled, but at least it'll run. It wo…

I finally have my Lombard up and running (mostly). However it will overheat if left alone since the cooling fan never comes on. Currently I'm using one of those PC slot fans to d…

AvalancheSJ, it's still worth shopping around for a cheap G4 as you should be able to find one in your price bracket if you hunt. The FSB does make a fair bit of difference and th…

Say what? I distinctly recall MacAddict doing an article on various machine upgrades. They upgraded on and painted it to look like a marshall amp. Click to expand... That was …

Say what? I distinctly recall MacAddict doing an article on various machine upgrades. They upgraded on and painted it to look like a marshall amp.

That iMac is a good performer, and yet I would try for a lower price on it if possible. If you're not taken by the idea of a tower and you just want a convenient little workstation…

well i was looking on eBay and craigslist and both are kinda pricey for a g4 iMac, Mac Mini, and PowerMac, about $90 (£45ish) + shipping about $25 and up. and (with my PC knowledge…

It's not really worth it, for around the same amount you should be able to get a low end G4 on ebay: £35 G4. Much more expandable and all you need is a cheapo monitor to go with i…