Don't recell a LiON or LiPo battery. You're taking your life in your hands, unless you really know what you're doing. The smarts in there stop them asploding in your lap.

Not a small part of the problem seems to be that some software serials were generated only when you supplied the ID number of the particular Newton unit itself on which you wanted …

Please consider that some authors do not want their software to be freely developed after they have abandoned it. It is all fine and dandy to label them as greedy because of that,…

I do think that if a programmer ceases support of a product they should either make an unprotected full version available for distribution or else continue to provide unlock codes …

I do think that if a programmer ceases support of a product they should either make an unprotected full version available for distribution or else continue to provide unlock codes …

Thanks, guys you have given me a lot to think about and check out later on today. Both CD drives are IDE, and nothing is stuck in either one. I managed to use a paperclip to check …

Apple really doesn't publish any technical information in that detail, which is a shame for old machines that are hard to equip with proper replacement parts. Anyway, some people …

Are the battery cells in Pismo/ Wallstreet batteries matched in any way with the battery controllers? In other words, is there any point in re-celling a main battery with different…

If you have another mac with firewire, you can also try booting it into target disk mode and running disk utility on the other mac. One thing to try if you get a boot-able OSX ins…

Ok, thanks. I was wondering about the hard drive, but I wasn't sure because the older Macs actually tell you the HDD is corrupted by displaying the floppy disk with a question mar…

I assume you are trying to push the button on the front of the machine right after power up. (Keyboard eject does not work on the AIO IIRC). If you wait until it thinks it is boo…

Turn it on after unplugging the CD's data cable. If it ejects, then the problem is with the configuration, cable, or motherboard. Make sure the CDROM is set properly. On most beig…

Actually, there is nothing on the hard drive. It is totally blank, a clean slate. I did it that way so I could install a fresh copy of 9 with all the drivers on the machine. Shoul…

What happens if you disconnect the power to the CD drive, and just boot with the hard drive?

nope, that did not do anything. I hunted and pecked for the original module, popped that in, removed the other modules, and booted. Still nothing. It also can not be power, becaus…

Some RAM will clock down to lower speeds, but I have seen some that don't. Has something to do with the CAS latency or something techie like that.. :lol:

aha, I did not check the RAM. I think I put PC100 in it. I thought it automatically would work at PC66. I will pull out everything but the stock stick and try again. If it were bad…

What kind of RAM did you use? The system bus in the G3AIO is 66 mhz. Did you use PC133? It might not be compatible, or maybe one of the DIMMs isn't seated properly, or maybe jus…

yeah, I have one of these beasts. I upgraded the RAM heavily, and put in a large 20gb HD. For the longest time it was booting with no video, but something told me to give it anothe…

If a programmer ceases support of a product they should either make an unprotected full version available for distribution...their software will be made available in unprotected fo…

Ooooooooo..... That implies you could do the same job on a 2300 - if you can find the clock jumpers

Sorry, my eyes glaze over at five-line sentences.

Wow.... It's a early ModBook!

Check it out. I am considering picking it up, just for collectibility, but the price still seems a bit steep. Compared to the few I have seen in the past though, it still seems to…

Sounds like a bad HD to me as well. 75% of the time a bad OS access generates that type of behavior. I would try both the CD and Firewire drive methods mentioned above. I had a TiB…