No, I bought it at the apple store. Have you come up with any solutions to the problem?

is it a cd or is it a dvd

I have a beige G3 with DVD that exhibits the same delay while the disk is being spun up. It'd be nice if it didn't happen!

I have the same problem exept I have a 6500 with a 12X CD drive. The whole computer momentarally freezes while the CD gets spun up and accessed. Its especially annoying when you ar…

Congratulations, you have just discovered the down side of IDE devices, the CPU is involved in the use of the IDE device so every reference will have a negative impact on your mach…

duplicate deleted Don't ya just hate computers.. [This message has been edited by sedgwick (edited 08-17-99).]

It's a CD drive, not DVD. sedgwick, the processor idea makes sense, but I'm not sure it explains why the entire computer "locks up". I literally can't do anything but move the …

I wonder if the difference between a Mac and PC with an IDE CD-ROM is that Windows is not as actively aware of whether disks are inserted into drives (CDs, floppies, etc)- I've hea…

I have a 6100 with an ex 32x SCSI CD-ROM and everytime I insertn a CD it takes abour 3-4 seconds for the computer to become responcive.

I have a 6100 with an ex 32x SCSI CD-ROM and everytime I insertn a CD it takes abour 3-4 seconds for the computer to become responcive.

Peecees will not let you write to an empty drive. Nice idea, though :-) In addition, peecees *do* have the same delay, IF they are waiting for data from the drive in an active pro…

Since your friends and relatives can connect at 40k, the problem isn't with your ISP. Since I have a Wallstreet Powerbook running 8.6, and I can connect at 40k, it's probably not …

I agree. Your problem is likely with the phone lines. I connect with my bronze both at home (on two lines, one dedicated and the other my regular phone line) and at work. At work I…

One more thing! I have tried to disconnect all my in-laws various phones and answering machines and such in an attempt to get their connection speed up without success. This somet…

It's the phone lines 99% of the time. Sometimes you have to call the phone company, and ask them to run a line quality test. But disconnect your computer from the phoneline for …

The nicest one I've personally seen is the TouchStation by MicroTouch (www.microtouch.com). The touch screen is bonded to the imac screen under a layer of glass. It's impervious …

see www.promax.com for an IDE upgrade kit via a PCI card

Do you have an iMac or B&W G3? If it is an iMac then USB is your only shoice and I WOULD suggest LaCie, I have one of their SCSI CD-R's and it is excellent! --If you have a B…

I've had the same concerns as you about the G4 400 motherboard. Here's the way I understand it. . . The G4 400 will first be released on the Yosemite motherboard, the same motherbo…

ok that was the way i thought it was but i just wasn't sure. thanks for confirming. ------------------ "once you go mac you never go back!"

Chances are that Apple will speed bump in November or December, phasing out Yosemite. Then 450 MHz will be the lowest speed, so there shouldn't be a 400 MHz sawtooth.

You need to get an Apple Service provider to order a mounting kit (they may call it a sled) - you can get either an upper tray sled or a lower tray (they are different). I would ge…

Hi, You should check which revision of beige G3 you've got as the early ones do not support slave drives. I wanted to add a slave drive myself but cannot because of this situation…

I'm not etirely sure about this, but a friend of mine has 3 Macs (an iMac, PowerComputing 180, and a Mac IIfx). Each computer is connected to the internet over a 56k modem, and the…

IP routing via IPNetRouter is not something that will tax your Quadra - even at 10Mbs speeds. If you are concerened about security you might want to use your Quadra for routing o…