DAN, Hi. All of the jumper settings can be found at: www.xlr8yourmac.com/G3-ZONE/yosemite/OC.html Like I said, 120MHz is the only other truly stable setting concerning the other…

I just sent off for a jumper block from Output Enablers that will fit my Beige 266MT for 300mHZ upclocking. Anyone used these blocks? Did you run into any problems, and can the c…

I just overclocked my B&W G3 350 to 400MHz. The CPU temp was 31� without any extra cooling. I installed a new heatsink and cpu fan and found that it had no effect on the CPU …

As promised here is my water cooled heatsink. <A HREF="http://vms.www.uwplatt.edu/~spinkb/water_heatsink/">ht tp://vms.www.uwplatt.edu/~spinkb/water_heatsink/</A>.

"This was a good move on Apple's part because for the cost of a plastic jumper block (maybe 2 cents?) they can charge you almost $1000 more for the 400 MHz version vs. the 300 MHz …

Nilssen, the 300, 350, and 400 mhz processors are all the same yes, in some ways... some of them are copper and some arent, the copper ones being from IBM. and one of the biggest …

I remember reading about some company that made super-cooled peecees (it at least a year ago). I emailed them to see if they sold the chasis seperately from the inards. It turned…

Thought I'd answer my post from a few days ago... If any of you want to upclock your 233-266 to 300 the QUICK and EASY way: Contact Output Enablers www.io.com/~oe or oe@well.com.…

www.kryotec.com sells cooling systems that cool a processor down to -40 C. Yes, -40 C!!! Unfortunatly you cannot buy one of these refrigeration units without it being pre connecte…

��Quantum Fusion�� read this please agin:-) Tanxxxxx for u words.... Can't u post the jumper settinigs here (o=none, x=jumper) My temp is 26 deg.c. But the settings for 420/120 do…

I know all this overclocking is nice, but I don't want to ruin my warranty, and I don't want to ruin my motherboard. I find there are also cost efficient ways to increase your sp…

Other alternatives are great...but the benefits aren't as much as you make them out to be. Having virtual memory on isn't as much of a slow down as it used to be in the past. (sys…

eeeh, Intel Pentium III's are extremely hard to overclock, why is Intel doing this, I dunno, but they did. Sure, Celeron's are better to OC, but Intel is clearly trying to make ove…

Hello, I have a Sonnet G3 upgrade in my 6100. Without this card, MkLinux works. However, this card doesn't support MKLinux. I have asked Sonnet many times about this, and I always …

The problem is the NuBus slot in your 6100. I have a NEWER 210 G3 in mine and face the same problem. There are not many NuBus machines out there, comparatively speaking. In the …

I too have the NEWERtech 210 G3 upgrade in my 6116 PPC Performa. It's been a real system saver - until I boot into Linux. I read somewhere that you could change the type/creator of…

Try: http://www.erf.net/~brd/mac/6100faq.html#linuxg3 It doesn't say how it works or an e-mail address for the postee but the guy who runs the website might know.

I *THINK* you need to install Linux WITH the card in the slot and WITH it active. If you install Linux with the card inactive, and then activate the card, it might screw up the har…

Newer G3 cards on Nubus Computers are working with Mklinux (I ' m using a 7100/80/Av + Newer g3/240 Sonnet's don't ... It would be a good idea to subscribe to mklinux-setup Mailing…

Does anyone know anything spectacular about any new Mac models? Sam Rosen [This message has been edited by srosen (edited 03-13-99).]

Could you be more specific about "spectacular"? They're Macs! Isn't that spectacular enough for now? By the way, aren't you in some commercial or something? I suddenly crave chick…

Quote: Originally posted by srosen: Does anyone know anything spectacular about any new Mac models? Sam Rosen [This message has been edited by srosen (edited 03-13-99)…

it did in 1999

a desktop with the whole iMac saga would be welcome

Quote: Originally posted by JohnSmith68: this belongs in the lounge you ****ing moron.