On the Epson Stylus 600 you cannot preview your document before you print. On the Epson 740 you can. Is there a driver upgrade for the 600 that will let you preview before you prin…

i recently put a pci usb card in my performa 6500 and am using apple developer usb drivers (1.2f2) in my computer. i purchased a macally usb keyboard and i cannot turn on my comp…

Hello, I wonder is there any place I can buy a 7"NuBus A/V card for my PowerMac 6100/60? Thank you

I have 2 IMACs that both have Apple Remote Access software on them. I need to install one of the machines at a site that has a NT Network running. Using my internet access I want…

First, to connect to an NT network, all you need is a standard base-T cable plugged into the ethernet port of your iMac. For further functionality and interoperability with the NT …

Can anyone tell me how to use my iMac as the monitor on my G3 tower. I have heard it to be done, and need to know how.

Now I have never done this and never heard of it being done but I know that if you take the bottom casing off of the iMac that the monitor cable is there. I guess you can connect …

All this talk about overclocking has me wondering what I can get out of my beige G3/266 Minitower. Anybody tried that?

I too wouldn't wind knowing how to get my Beige G3/300 MT upto 333Mhz if possible. I've seen how to get a 233 faster but never the 300.

Well, subject pretty much says it all. Does anyone have experience with putting a Mac in a new case? I have a 7300 that I'd like to put into a big tower so that I can add more driv…

Hi, you can put the 7300 in any ATX Style case. Apple just used a form factor near ATX. The only thing to do is to make your own I/O shield in the back of the case, because most A…

Does anyone know how to change the duplex setting of the built-in 100BaseT ethernet from the current HALF duplex to FULL duplex without having to get another NIC from another vendo…

Ckeck your hub setings, I run a Macsence switch and I get default full duplexing. If your hub only handles half then the card will sence and switch to a half duplex. -------------…

Just reading the docs on the onboard NIC and the secret is that your hub needs to be autosensing and full duplex capable. Meet those conditions and the B&W will connect at 100B…

Is this possile? There are no G3 upgrade cards avalible for my 6500, so i want to overclock it. Im not afraid of heat problems of any sort...Please Help!

Actually two companies make upgrade cards for the 6500. Sonnet and Vimage. Here's a link to the sonnet site: http://www.sonnettech.com/product/crescendo_pcig3-l2.html The upgrad…

I am running the VImage upgrade in my 6500. Haven't had any trouble with it, well worth the cost!! Believe the cost has come down quite a bit since I bought in Feb, also they hav…

Hey! i'm really interested in overclocing my PM6500/225. anyone know where i can get info on it? can anyone PlEASE tell me how to do it? Has anyone overclocked their 6500/225? how…

I have a powerbook G3 233/14.1 and am looking for a speed bump that will not hurt my processor, does anyone have any successful configurations?...

My opinion....All processors are the same, only rated for performance. Meaning, chips may qualify for the 400MHz range but released as 300-50MHz models based on performance ratings…

I have a PC PowerCenter Pro 210 and I know I can overclock it to 240. I need an extra surface mount jumper though and I do not know where to purchase one. So, if anybody out there…

BTW, my e-mail is One2meny@aol.com

Hello All! I'm on the verge of buying a Performa 6360, because I can get a really sweet deal on it. The one thing I'm worried about is that I went to Micro Conversions' web site,…

I'm not sure of this but it may be because your 6360 only supports 5 inch PCI Cards and the Voodoo2 is a 7 inch.

I own a Performa 6360 and was going to purchase a video card however I decided to sbegin saving up my money to by a new Power Mac. When I was looking I found that only the ATI RAG…