Getting to the speaker isn't too bad, and as long as you are really carefull with the screws, as the metal is quite soft and they get cross threaded quite easily. If the speaker ju…

Has anyone here successfully installed a second internal IDE HD on a Rev. 1 Yosemite G3 (HD brackets side by side, not stacking). The Apple TIL says its not possible, but xlr8your…

I've got a 27 gig IDE HD slaved in the zip bay (slave to the DVD rom drive) and a 6gig (salvaged from my old G3 Beige) slaved to the main 6gig IDE in my BW, which is also Rev 1. I'…

You can also buy a cheap PCI ATA card and run both drives off of that, or leave the stock drive there and buy *two* new ones to run off the ATA card.

Don't put the hard drive in the zip bay...I've heard it's not designed to take that heat and can screw things up pretty bad.

On the Rev 1 B&W the computer will recognise both Master and Slave IDE hard drives, but support for both devices on the same bus wasn't all the way there. You can use each ch…

Quote: Originally posted by Sgt. Baxter: You can also buy a cheap PCI ATA card and run both drives off of that, or leave the stock drive there and buy *two* new ones to …

Quote: Originally posted by Doug Brown: Don't put the hard drive in the zip bay...I've heard it's not designed to take that heat and can screw things up pretty bad. …

Quote: Originally posted by AP@cultfiction.com: what happens cuz that's where I put a slave 26 gig ide..... the mounting bays at the bottom really suck.... I've be…

Machine: rev1 B&W G3 I've also got a 27BG IDE drive in the zip compartment and it's been fine for 5 months now, with the machine sometimes running for 48hrs at a time, never ha…

I'm modifying parts of an AIO G3 for an automotive application, and when I first opened the system I found that it has a special personality card with a connector that has signals…

The topic says it all. ------------------ People aren't as dumb as you think. Wait, what was I thinking, 90% of the world uses WINDOWS! You don't like Macs? Good, more for me.

Radio Shack.

Once you pull the original, yellow, jumper block off the pins, you can use the individual SCSI ID jumpers for internal hard drives to change the settings. They work fine in my B&am…

Just use a bunch of ordinary jumpers.

I just re-arranged the jumpers within the jumper block itself on my Beige 266 (now a 300), I don't know if its the same on the B/W.

Does anyone knows the way how and what to change on this board taken out from PM 9600/300 to use it in other computers, like PM 7600?

Most likely, you can just plug it into the cpu slot on the 7600. When I upgraded a few 7300's here, I plugged the 604e card into an old 7500 we use here as a secondary file server…

No, the processor card structure is different. It has cache on processor card. Processor doesn't work if i put it directly into 7500 or 7600.

Quote: Originally posted by Tikas: No, the processor card structure is different. It has cache on processor card. Processor doesn't work if i put it directly into 7500 o…

Everything I have read indicates that the 604e 300 mHz processor pulled out of a 9600/300, can ONLY be used in other Macs that have the Kansas motherboard. Those are the 8600/250,…

I know that this processor card originally works only with PM 8600/9600. There is article in Apple TIL saying that. So if someone knows how physically modificate this card to make …

Quote: Originally posted by Macfan2: Everything I have read indicates that the 604e 300 mHz processor pulled out of a 9600/300, can ONLY be used in other Macs that have …

Quote: Originally posted by Tikas: No, the processor card structure is different. It has cache on processor card. Processor doesn't work if i put it directly into 7500 o…

8600/9600 has different motherboards than 8500/9500, different part numbers and structure. I'm asking anyone who knows these thing can we make physical changes on processor card or…