I've done a little overclocking in my days.... PB DUO 230 -40mhz Quadra 700 -40mhz Performa 636 - 40mhz 2 6100's - 80mhz 6500/225 - 275mhz Sawtooth G4/350 - 400mhz The hardest on…

Quote: Wish I bought a Yikes G4 (supposedly can OC them to 800! )![/b] can someone verify this and give instructions?

i have a pm 6500/225 running 9.0 with a 30 GB drive. it is full. i want to add a second one. any suggestions? scsi drives are WAY too expensive. thanks. grant

You can't. It will only support one IDE device. I had that same problem when I had a 6500. I tried to put a SCSI disk in the top bay, but it would overheat and unmount itself.

It might be cheaper to buy a USB PCI card and a USB hard disk.

what about this? http://www2.promax.com/Products/acti...ortOrder=ascen d&-sortField=Manf&-sortOrder=ascend&-sortField=Manf.%20PN&-sortOrder=ascend&-lop=or&…

your main problem will be that the upper bay is not ventilated enough to run a hard disk. It will overheat. how much is dependant on how much you use the disk. you could get a fa…

how about this? http://www.electricdogs.com/

Hey camiltoe, thanks for that link... [This message has been edited by zac4mac (edited 05-24-2000).]

Quote: Originally posted by camiltoe: how about this? http://www.electricdogs.com/ Has anyone actually used one of their Firewire harddrives? Their price seem far…

Today I ripped apart both iMacs... I'll have pics up when I get some developed... uh.. it was pretty freaking easy actually... >20 screws involved, and it wasnt that b…

Go Cash! Are you going to post pics from the innards of your iMac? If so, please take pictures of the Voodoo card from EVERY angle, using the greatest resolution. I want to learn …

Sounds like you could design some sort of external switch there Godfather. That would probably be handy for other Stealth Port users.

Holy Sh*t batman! Nice CA$H, I salute you.... now if only i could find a Rev A logic board.... HEHEHEHE

Godfather- uh.... I took a picture of where the mezzanine connector could EASILY be soldered onto the rev D iMac board... we're talking less than 20 bucks labor plus parts. It h…

Disconnect monitor from rage II set, reconnect to your brand new Voodoo5 PCI. Sure, its gonna require a serious soldering effort, but I know screwing around with monitors is possi…

hmmm... soldering on a mez? is there Clean uncoated pads to solder to? cuz i kno i guy who would be able to do a job like that

if someone can solder a mezzanine slot onto a rev c/d, then can one not concievably make a PCI break out box for said iMacs? hmmm......

boing! breakout box, now you are talking go go go

Dammit. Hey guys, none of that will ever work. Go read the "never heard of hack" thread. You can ONLY use a "pass through" style card. Guess what? THEY DONT MAKE THEM ANYMORE…

I know they used to make a PCI breakout box for older powerbooks that interfaced with the expansion bay. It added something like 3 PCI slots in a case that one could hook more stuf…

Hey Sine, you oughta submit your numerous new smileyfaces to MacNN. They're good enough to add to the Smiley Face list

I agree. Your smilies rule. Ca$h PS: Anyone got any iMacs they want me to take apart? Heheheh. >

Sad to say, Thoes smileys are not mine :*[ If u want, check them out urself at: http://geocities.com/r337m0nk3y/net/ and http://geocities.com/r337m0nk3y/net2/ they have insp…

So how would you be able to get a pass-thru like 3D card to work? *is* there a way to get the 16MB voodoo2 in an iMac?