The Midibox sequencer's response time is measured in nanoseconds. Of course, as you point out, MIDI is a serial protocol and very low bandwidth, so there is a limit to the timing …

LC III(+) wont work as theyre 25/33mhz, arent they? the 68882 on his card is 16mhz tho... 68882 would work with 020s... Im running a 68882 in my LC myself.

If you start up while holding Option-Apple-O-F, can you get back to the Open Firmware prompt? Another thing to try is a verbose boot - hold down V (or Apple-V) during startup. It…

I love my Ataris, but they have been put away for most of the past year while I have been slowly moving my music setup around. I've got a box of Dr. T's software which is all amazi…

Yes, after a little trial and error, I had mine at full speed for both OS 9 and OSX. If OWC doesn't solve the problem, I'll get my machine out of storage later this week and check…

Ladies and Gentlemen, I still cannot find the quote button in this forum. Did it get eliminated for some reason? I've opened this forum in FireFox and Safari but I still cannot s…

Regarding the dead PMG4: The reason it isn't responding, powering up or waking from sleep is due to the Power Management Unit getting a bit screwed up. To fix the problem, I woul…

Apple didn't start using SDRAM (aka PC66, PC100 and/or PC133) type sticks until the Beige Power Macintosh G3 and G3 All-In-One models; sometime in late 1997 or early 1998. So, tha…

Can you give some links of the 6v lead acid battery I should buy and exact specs?I understand nothing regarding electonics and electricity! Click to expand... I'm looking to ad…

Anybody who used quotes in a reasonable manner shouldn't be affected anyway. If it takes you even fifteen full additional seconds to find the text you wanted to talk about and then…

If you have such a problem with people quoting uncontrollably, why not just PM them to stop doing it so much? Instead of ruining it for the rest of us?

I can't believe I used to print everything out and then OCR it back in! Click to expand... OMG OCR! I type it all in octal on a telephone pad

JDW, be that as it may, I think we tend to lose a little perspective around here, due to our nostalgic love for these little B&W compacts. I was around then, and 9" B&…

You can still easily quote from the "Post a Reply" page. Click to expand... You know, until this thread came up I didn't notice the quote button on the reply page... I also did…

All you've done is inconvenienced people. Click to expand... not really, honestly I forget the quote button is there, why? I usually just highlight the point I want to focus o…

I'll give that a try. Thanks!!

The 68020 was usually mated to the 68881. I'm not sure if they can be interchanged or not. The card is probably for the LC II and III/III+ (or maybe just the III/III+ if the connec…

Great points, JDW! A comment worth pointing out about the SE/30--according to the fourth edition of the Macintosh Bible, Apple was rumored to have been thinking about re-releasing…

if I look off the network settings for the G5 Tower that auto-connects, is there a way i could manually enter that info in on the G4 MDD? Click to expand... If I recall, in aut…

Yeah seriously! Are you just trying to make it us harder for us?

I can't see what the big deal is, you should still be able to use quotes via BBCode. Its not as if we've banned quotes completely. This is a test. Testing testing one two thr…

Yeah, I wouldn't doubt. I think that was the initial reason it was disconnected in the first place, I guess I just "happened" to revive it for a few months. And I've had an AWEFUL …

If you enable dynamic power management, doesn't that mean the CPU drops to half-speed when possible, as in idling while you look at a CPU speed screen? CPUD and other speed sensing…

Okay I emailed OWC's tech support. In the meantime... Metronome indicates that my bus speed is indeed set to 100MHz. I double checked my jumpers and they are correct for that sett…

The power supplies on that model are known to fail, so that may be what died. As for ethernet, sometimes the computer won't autonegotiate a suitable connection with the central hub…