My just-new one with 512k RAM and a 400ghz processor runs Tiger quite nicely. Only trouble I've had is with Word 98 running in classic mode - had to get something to word process i…
68kMLAHardwareby J English SmithThu, 3 Dec 2009 - 05:54
My just-new one with 512k RAM and a 400ghz processor runs Tiger quite nicely. Only trouble I've had is with Word 98 running in classic mode - had to get something to word process i…
68kMLAHardwareby J English SmithThu, 3 Dec 2009 - 05:54
Beachycove,
I have a Pismo (see signature) running OS X 10.4.11 perfectly fine. It performs quite well with Tiger, although I'm planning on dropping it down to Panther (10.3.x) d…
It does sound like a dried out solder joint, somewhere in the red line. If it was a dying gun I wouldn't expect it to be intermittent at first.
http://www.repairfaq.org/sam/monfa…
68kMLATroubleshootingby BunsenThu, 3 Dec 2009 - 03:12
If anyone has a link to a document chronicling the secret recipe for speaking to an HD-20 it might be an apropos time to trot it out.
Click to expand...
We've been begging for…
The screen of my Color Classic would intermittently go off color - as in the red would become greenish and so on. It was intermittent a few weeks ago, now it seems to be off color…
68kMLATroubleshootingby ClassicHasClassThu, 3 Dec 2009 - 01:12
I just want to point out in answer to the question in my original post, one should not attempt to use a normal 4uF electrolytic (polarized) cap in place of C1. C1 is a bipolar cap…
68kMLATroubleshootingby BugsiWed, 2 Dec 2009 - 23:56
It is surely going to be as safe as any online store, and it's likely safer than going the eBay route, but as it's only a hard drive cable, how much do you stand to lose?
68kMLASoftwareby beachycoveWed, 2 Dec 2009 - 23:11
Not sure if this is applicable in your situation, but I'm running Netatalk under Slackware 13 (upgraded from Slackware 12.1). After my upgrade, I noticed that I couldn't connect t…
68kMLANetworkingby QuadSix50Wed, 2 Dec 2009 - 22:52
Porter,
Thanks a lot.
That was interesting. I removed (well, commented) the config line in the atalkd.conf and restarted services, then power cycled the AsanteTalk.
when I check…
I would clear the address and zone information from your netatalk.conf.
Zones only make sense to netatalk if it is active on multiple network cards and acting as a bridge between …
If I unplug the AsanteTalk for a minute, the Mac tells me that the AppleTalk network is not available. If I then plug it in I do get the alert from the Mac that the AppleTalk netwo…