Instead, try: Code: $ sudo mount -o rw -t hfs ./hfs24M.DSK /mnt/mac -o loop -o rw sets the disk to be read/write -o ro sets the disk to be read only

If you use Safari, get ClickToFlash (http://rentzsch.github.com/clicktoflash/) - it has helped me immensely with the beachballs. Click to expand... Yes, that helps quite a bit…

"Or it could just be that your psu is a little low on one of the lines" - replace the power supply? Click to expand... or rebuild it

I acquired this baby a few weeks ago and it came with a stock CC logic board, 10 Meg of RAM, a 700 MB Qauntum drive, and an Asante PDS LC ethernet card in it. And it came with thi…

I got the same error. Remember that I'm using the Blanks floppy images.

Have you changed the RAM, hard disk or PDS card? Maybe something is drawing a little more power than before. Or it could just be that your psu is a little low on one of the lines.

man mount gives a clue. Try mount -o rw instead.

Hello once again, Update: I managed to get a good-condition working PB 180c, and it works great! Kind of makes this thread useless, but I'm keeping the 180 around in case I want t…

PRAM has been zapped. The hard drive has been reinitialized. It's a straightfoward clean install.

PRAM problem? Bad or weird partition on the disk?

Apart from saying that you'd done it, is there any good reason to put 512MB of RAM in a Quadra, especially if 128MB SIMMS cost $20 a pop? I suppose that, with 512MB, you could run…

My iMac keyboard (the original "Apple USB Keyboard") is exactly the same. I'd say it might be because those ports haven't had many plug/unplug cycles compared to the USB ports on t…

-original Apple USB keyboard (the ones that I don't like) Click to expand... That's still my main keyboard on the Mac mini. I typed out some code updates for my site last eveni…

-original Apple USB keyboard (the ones that I don't like) Click to expand... That's still my main keyboard on the Mac mini. I typed out some code updates for my site last eveni…

Look for 128 meg 72 pin SIMMs for Cobalt Raq2 systems. They'll work, and they aren't ridiculously large like some 128 meg SIMMs. You can usually find them on eBay for $20 USD or le…

Just so you know, it's been said that the Q840av will take 128 Meg SIMMs, giving you 512 mega total. Give it a try, and let us know... Click to expand... I'd be glad to -- any …

The PB 170's HD is actually a 1 GB IDE HD connected to a IDE-SCSI bridge. Click to expand... Oh man, that's truly a great find - I've sought out one of these bridges for years.…

{ "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be loaded. Please try again l…

Just so you know, it's been said that the Q840av will take 128 Meg SIMMs, giving you 512 mega total. Give it a try, and let us know... Click to expand... I didn't know 128MiB S…

Tiger explicitly prevents you registering either IPADDRESS or IPGATEWAY AppleTalk names using NBP. So no MacIP gateway on Tiger upwards.

From the comp.sys.apple2 - Frequently Asked Questions (and answers) part 2 of 2 by Dan DeMaggio: Code: The GS represents a giant leap in the Apple // line. It can still ru…

IPNetRouter for OSX doesn't have any more MacIP capability :-/ So if I want to be using the PB as a gateway I'll have to find another software, like Vicom's SurfDoubler or Vicom…

The PB 170's HD is actually a 1 GB IDE HD connected to a IDE-SCSI bridge. Click to expand... Oh man, that's truly a great find - I've sought out one of these bridges for years.…

I seem to remember some of the Woz editions shipped with ROM 01 boards. It looks like mine certainly did. Also, are there any real hardware differences between ROM 00 and 01 machi…

These were 604- and 604e-based machines, not the 604ev-based one I referenced in the thread. (I tried but couldn't delete the duplicate thread, by the way, and am not sure where i…