Try to install Mac OS 9.2.2 (use os9helper, if necessary). The latest ATI drivers for cards supported by your G3 should be included in the system software.

The first Apple PowerBook with SCSI Disk Mode would have have to have been the PowerBook 160, 165, 165c, 180 or 180c - I can confirm that the PowerBook 140 and 170 definitely do no…

Let me re-phrase the question: Where can I find the software -----> for free? It's funny a few years ago, locating the software would be no big problem. But now, it's old …

I tried all of those, two are just links to "Driver Detective".... looks like PC spyware to me. The problem is that all the usual download sites have links back to ATI's old HTTP …

Looks like you have to call apple for the restore disks and see if they have them. Otherwise, I would look on eBay or something of the like that might have them. PowerMax MIGHT, b…

http://ati-radeon-9200.mac.findmysoft.com/ http://www.howtodrivers.com/model556559.html http://www.driverfiles.net/Video-Adapters/ATI/Radeon-9200-Mac-Edition/download/page,sh,471…

OS 10? Hey this is the 68KMLA yeah yeah, I know, 3400c is a G3, anyways, Zip drive works like a dream under 8.6 so guess a troubleshooting session with extensions and control p…

Did you try a PRAM reset? That has worked wonders for me on occasion, though admittedly under 10.3 more than 9.2.2.

Paging Trash80toG4 ... where is that guy?? Click to expand... My alternative idea was trying to pin-map the docking bar to a PDS of some sort and mounting it inside a MiniDock.…

whereas older lappys, such as say, my 1400 have, well, a much more civilised size trackpad. Click to expand... Substitute "barely housebroken" for "civilized" and you'll . . …

As much as I hate inkjet printers (its ok, the plotter makes up for that ), it sounds like quite a setup. Speaking of trackballs, as much as I used to like putridpads a few ye…

This "ADB peripheral" wouldn't happen to be that Paladin keyboard would it? Click to expand... HEH! You betcha! Adapting some young whippersnapper of a PB to royalty of periphe…

I have heard that later Powerbooks, into the early G4 series even, used ADB internally for the trackpad. What would be involved in hooking into that, I have no idea. Click to e…

I have heard that later Powerbooks, into the early G4 series even, used ADB internally for the trackpad. What would be involved in hooking into that, I have no idea.

Ugh, bad timing. It was down for a while today because of all the storms over where the host is. It is working fine now.

And a proxy gives me: couldn't connect to host So... try it from within a proxy, wackymacs!

Network Timeout The server at machut.valleyofthelights.com is taking too long to respond. The requested site did not respond to a connection request and the browser has stopped w…

The correct address is http://machut.valleyofthelights.com/ - works fine. Click to expand... Doesn't work for me.

I have never dealt with a MP120 personally, but it does have a socketed ROM, meaning that you can pull it and replace the ROM chip with another from (ideally) a MP120 that had been…

The correct address is http://machut.valleyofthelights.com/ - works fine.

This "ADB peripheral" wouldn't happen to be that Paladin keyboard would it?

Now that's service! This is almost like the old days here & on 'fritter . . . . . . ask a question-n-have an answer posted lickety-split! There were no Po…

There were no PowerBooks made that had both ADB and USB from the factory (the only Mac that can claim that honour is the Blue and White G3). However, you can add a USB CardBus card…

From what I can gather, the server's up, but there's nothing on it. *crosses his fingers that Mac Hut comes back online sometime within my last 48 hours of access to high speed…

er... i get: Safari can’t open the page. Safari can’t open the page “http://www.valleyofthelights.com/jcoventry/machut” because the server where this page is located isn’t respon…