Hello collectors: I have recently acquired an SE with a Radius Accelerator 16 installed. However, it is the two-floppy model with no data, and I understand that to access the ful…

I recently received an old 400mhz blue and white g3 from someone and intended to use if for some pre-OSX stuff I have. I managed to get it to start up, and was able to boot from th…

Apparently there was some sort of a settlement between Apple and Linksys allowing Apple to use the name. I personally think Apple should have had their arses sued off. Steve Jobs…

The only one I ever snapped was totally on purpose, with a hammer, while building the Macminitosh. Kind of fun, though! But I'm always afraid whenever I have to use some force…

I came very close on my Classic II while refurbing it. I am rather hesitant now to monkey around inside my Mac now unless I have no other choice...

You probably no longer need it but here you go: { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The r…

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230415157626 Get em while you still can.

If someone would come and pick it up from my door, I would send it off into the world with a ribbon and bow attached. Right now it's taking up useful space. Click to expand... …

OK who here has snapped the neck of a CRT during a repair attempt? Raise your hand! lol My first classic Mac, an SE. I did this a few years ago. SNAP! I was bummed. Well I fo…

Turned out to be leaky caps! Cleaned it up and it works. But I snapped one cap off so I ordered a set of caps to replace 'em all.

In other words, has anybody got a 6500 or a 6500 PSU lying around who could dig one out and post all the voltages and wattage for each for me? I need to adapt an ATX PSU to run the…

Did you try unplugging the floppy drive, the hard drive and the fan to see if it's caused by any of them?

I want to get down to a couple of ms of MIDI jitter. So far I'm at about 5ms with my computer setup. I'm now only recording simple note on/off events to make sure nothing is cloggi…

You will be limited to the number of tracks you can run on a Classic. Performer is the best of the lot in those days. But you will run into the same problem if try to jam too much …

I have an 1040STE with an external hard disk. I wish I could say I use it frequently, but it was sort of an impulse buy. Maybe when I get my music studio set up, I'll dust it off a…

In other words, has anybody got a 6500 or a 6500 PSU lying around who could dig one out and post all the voltages and wattage for each for me? I need to adapt an ATX PSU to run th…

If someone would come and pick it up from my door, I would send it off into the world with a ribbon and bow attached. Right now it's taking up useful space.

If the PRAM battery is good, then yes you have an issue with the motherboard.

Nice work Dennis!

I almost got that ST/ game console thing forget off hand what it was called, when it first came out, but I was shopping for a video game console and ended up with a genesis, other …

I use an ST Mega4 for older software which won't run on my Atari Falcon. Click to expand... Brother Atarian! I have a Falcon 030 but my best ordinary ST is a 1040STF. I'm tryin…

no not fully, yes its toast to joe user, it might be to you, to nerds it might be a interesting project to see what exactly is dead usual suspects, caps, corrosion (and or junk on…

My newest conquested LC 475 displays some strange problems. It refuses to power up, but with different working power supplies (one from my LC III, which works fine, and one from my…

being that large its not going to be anything mission critical (big farads = low frequency filter, or a really half hearted fudge of a timer) I have just been cleaning and sorting …

I have some 1,000uf 25 volt caps here, they were removed from a board, but that board was brand new and never used Click to expand... I'm not exactly sure if it's worth it. Th…